Operating Instructions
Table Of Contents
- Table of contents
- Read this first
- Getting Started
- Shooting movies/still images
- Before shooting
- Shooting movies
- Shooting still images
- Adjusting the exposure
- Shooting in the dark – NightShot plus, etc.
- Self-timer recording
- Shooting for the wide-screen TV – 16:9 Wide mode
- Adjusting the white balance manually
- Shooting techniques to match your circumstances – PROGRAM AE
- Focusing manually
- Shooting with special effects
- Checking/Deleting the last scene
- Viewing the recordings
- Finalizing a disc for other players
- Using a disc in VR mode (DVD-RWs only)
- Viewing/duplicating discs/editing the recordings on your computer
- Connecting your camcorder to a TV and a VCR
- Customizing your camcorder
- Troubleshooting
- Additional information
- Parts and controls/Index
128
Warning messages
*
1
You hear the beep sound when the message appears.
*
2
If the data is not recorded correctly, your camcorder automatically recovers data when turn on
the power.
• A disc protected on another device cannot be edited.
c Cancel the protection of the disc on the device used to
protect the disc.
• Copyright protected movies and sounds cannot be
recorded on your camcorder.
• The incompatible disc with your camcoder is inserted.
• Your camcorder cannot recognize the disc because of
malfunctions such as scratches.
• The disc is not set correctly.
c Set the disc correctly. (page 26)
• The disc recorded in the different format code from your
camcorder.
c Formatting the disc may enable you to use the disc on
your camcorder (DVD-RW only).
• An error occurred during reading or writing the disc.
• You cannot operate your camcorder during charging the
flash.
DISC PROTECTED*
1
COPY INHIBIT*
1
DISC ERROR*
1
FORMAT ERROR*
1
ACCESS ERROR*
1
NOW CHARGING*
1
Cause and/or Corrective ActionsMessage