Operating Instructions
Table Of Contents
- Table of contents
- Read this first
- Getting Started
- Shooting movies/still images
- Before shooting
- Shooting movies
- Shooting still images
- Adjusting the exposure
- Shooting in the dark – NightShot plus, etc.
- Self-timer recording
- Shooting for the wide-screen TV – 16:9 Wide mode
- Adjusting the white balance manually
- Shooting techniques to match your circumstances – PROGRAM AE
- Focusing manually
- Shooting with special effects
- Checking/Deleting the last scene
- Viewing the recordings
- Finalizing a disc for other players
- Using a disc in VR mode (DVD-RWs only)
- Viewing/duplicating discs/editing the recordings on your computer
- Connecting your camcorder to a TV and a VCR
- Customizing your camcorder
- Troubleshooting
- Additional information
- Parts and controls/Index
107
Connecting your camcorder to a TV and a VCR
Dubbing a disc to a tape
Dubbing to a tape
Before operation
•Set [DISPLAY] in (OTHERS) to [LCD] in
the SETUP display (the default setting is
[LCD]).
•Press the following buttons to make the
indicators disappear so that they will not be
superimposed on the edited tape:
– DISPLAY/BATT INFO
– DISPLAY on the Remote Commander
– DATA CODE on the Remote Commander
1 Insert the recorded disc into your
camcorder.
2 Prepare the VCR for recording.
Insert a blank tape (or a tape you want
to record over) into the VCR.
Set the input selector to LINE.
Refer to the operating instructions of the
VCR.
3 Start recording on the VCR.
4 Play back the recorded disc on your
camcorder.
When you have finished dubbing
Stop recording on the VCR, then press x on
your camcorder.