Operating Instructions

Getting Started
29
GB
Output the TV or VCR sound from the speakers
1
Connect audio cords.
Connect the AUDIO OUT (L/R) jacks of TV or VCR to the VIDEO (AUDIO IN L/R) jacks of this
subwoofer with audio cords.
* AUDIO OUT (L/R) jacks
If your TV does not have AUDIO OUT (L/R) jacks, you cannot output the TV sound from the speakers of this
subwoofer.
2 Change the mode of this system.
Press FUNCTION repeatedly to select “VIDEO.”
Note
Be sure to make the connections securely to avoid hum and noise. If using the VIDEO jack distorts the sound,
reconnect the TV or VCR to SAT.
Tip
When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select any sound
field other than “Auto Format Direct Auto” or “2Channel Stereo” (page 64).
IN
VIDEO
PHONES
REMOTE
CONTROL
OPTICAL
DIGITAL IN
IN
PB/CB PR/CR SCAN SELECT
INTERLACESELECTABLE
Y
VIDEO
S VIDEO (DVD ONLY)
VIDEO DIR-T1
FM
75
COAXIAL
AM
IN
LL
AUDIO
R
R
IN
AUDIO
FRONT R
CENTER FRONT L
COMPONENT VIDEO OUT ANTENNA
IMPEDANCE USE 4
SPEAKER
SAT
SYSYTEM CONNECTOR VIDEO
MONITOR OUTPUT
R
AUDIO
OUT
L
VIDEO
OUT
TV or VCR
*