Operating Instructions

Getting Started
27
GB
If you connect a digital satellite receiver without an OPTICAL OUT jack
Connect the digital satellite receiver to the SAT AUDIO IN (L/R) jacks only of the system.
To listen to the game machine (e.g., PlayStation 2) sound by using the
system
Connect the audio output jacks of the game machine to the SAT AUDIO IN (L/R) jacks of the system
with the audio cords (not supplied).
To change the color system (PAL or NTSC)*
* Asian and Saudi Arabian models only.
Depending on the TV to be connected, you may be required to select either PAL or NTSC of the
system.
The initial setting of the system for Saudi Arabian models is PAL.
The initial setting of the system for Asian models is NTSC.
If the color system of the TV is PAL
To set the system to PAL from NTSC:
1 Press AMP MENU.
2 Press X/x repeatedly until “Customize” appears in the front panel display, then press ENTER or
c.
The system enters the Customize Menu mode.
3 Press X/x repeatedly until “Color System Change” appears in the front panel display, then press
ENTER or c.
“Color System Change No” is displayed.
4 Press X/x to select “Color System Change Yes”.
5 Press ENTER.
Note
When the function is DVD, it takes a while until the images on the TV appears.
If the color system of the TV is NTSC
Do the same operation above to set the system to NTSC from PAL.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 87.
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals and set the
output signal of COMPONENT VIDEO OUT to the progressive format. For details, see “To set to
[PROGRESSIVE]” on page 88.
continued