Operating Instructions

92
US
b)
When you perform the Quick Setup (page 33),
the default settings are changed.
c)
This setting appears when you set the
corresponding speaker to “Y” in “SP SETUP”
(page 91).
xLEVEL
a)
When you perform the Quick Setup (page 33),
the default settings are changed.
b)
This setting appears when you set the
corresponding speaker to “Y” in “SP SETUP”
(page 91).
xCUSTOMIZE
a)
This setting appears when you set “SURR SP”
to “SURR Y” in “SP SETUP.”
b)
This setting appears when you set “SURR SP”
to “SURR Y” and “SURR B SP” to “SURR B
Y” in “SP SETUP.”
TEST TONE
(test tone)
T. TONE OFF: The test tone is
not emitted from the speakers.
T. TONE ON: The test tone is
emitted from both left and
right speakers simultaneously
while adjusting balance. When
you select one of the
“LEVEL” items, the test tone
is emitted from each speaker in
sequence.
F BALANCE
(front
balance)
0
Adjusts the balance between
the front left and right
speakers. (You can adjust from
the center 6 steps left (L6) or
right (R6).)
CEN LEVEL
b)
(center level)
0
a)
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
SL LEVEL
b)
(surround
left level)
0
a)
Adjusts the left level of the
surround speaker (–6 dB to +6
dB, 1 dB increments).
SR LEVEL
b)
(surround
right level)
0
a)
Adjusts the right level of the
surround speaker (–6 dB to +6
dB, 1 dB increments).
SB LEVEL
b)
(surround
back level)
0
a)
Adjusts the level of the
surround back speaker (–10
dB to +10 dB, 1 dB
increments).
SW LEVEL
(subwoofer
level)
+4
a)
Adjusts the level of the
subwoofer (–6 dB to +6 dB, 1
dB increments).
AUDIO DRC
(dynamic
compression)
DRC OFF: No compression of
DYNAMIC range.
DRC ON: Reproduces the
sound track with the kind of
DYNAMIC range that the
recording engineer intended.
DUAL MONO
(dual mono)
MAIN
SUB
MAIN+SUB
MAIN/SUB
For details, see “Enjoying
Multiplex Broadcast Sound
(DUAL MONO)” on page 77.
SL SR REV
a)
(reverse the
surround
speaker
position)
OFF
ON
For details, see “When placing
the surround speaker (L) in the
(R) position” on page 27.
SB DEC
b)
(surround
back
decoding)
SB MATRIX
SB AUTO
SB OFF
For details, see “Selecting the
Surround Back Decoding
Mode” on page 63.
DIMMER
(dimmer)
DIM OFF
DIM ON
For details, see “Changing the
Brightness of the Front Panel
Display” on page 81.