Operating Instructions

Settings and Adjustments
89
US
x LEVEL
You can vary the level of each speaker as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
* When you perform the Quick Setup (page 33), the
default settings are changed.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set [TEST
TONE] to [ON] for easy adjustment.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOL +/–.
x TEST TONE
The speakers will emit a test tone to adjust
[LEVEL] and [BALANCE].
CENTER
0 dB
*
(appears when
you set
[CENTER] to
[YES] in the
[SIZE] setting.)
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
SURROUND
LEFT 0 dB
*
SURROUND
RIGHT 0 dB
*
(appears except
when you set
[SURROUND] to
[NONE] in the
[SIZE] setting.)
Adjusts the level of the surround
speakers (–6 dB to +6 dB, 1 dB
increments).
SURROUND
BACK
0 dB
(appears when
you set
[SURROUD
BACK] to [YES]
in the [SIZE]
setting.)
Adjusts the level of the surround
back speaker (–10 dB to +10 dB,
1 dB increments).
SUBWOOFER
+4 dB
*
Adjusts the level of the subwoofer
(–6 dB to +6 dB, 1 dB increments).
FRONT
(CENTER)
Adjusts the balance between the front
left and right speakers.
The center position is shown as
“---.” (You can adjust from the center 6
steps to left or right.)
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the [SPEAKER SETUP] items, the test
tone is emitted from each speaker in
sequence.