User manual
Table Of Contents
- Learning more about the camera (“Help Guide”)
- Viewing the Guide
- Checking the supplied items
- Identifying parts
- Inserting the battery pack
- Charging the battery pack
- Inserting a memory card (sold separately)
- Setting the language and the clock
- Shooting still images/movies
- Viewing images
- Introduction of other functions
- Using software
- Importing images to your computer and using them (PlayMemories Home)
- Adding functions to the camera
- Number of still images and recordable time of movies
- Notes on using the camera
- Notes on High Frame Rate shooting
- Specifications
GB
24
(Custom Settings)
Zebra Displays stripes to adjust brightness.
MF Assist Displays an enlarged image when focusing manually.
Focus Magnif. Time
Sets the length of time the image will be shown in an
enlarged form.
Initial Focus Mag.
Sets the initial magnification when an enlarged image
is displayed using [Focus Magnifier].
Grid Line
Sets a grid line display to enable alignment to a
structural outline.
Marker Display
Sets whether to display the marker on the monitor or
viewfinder when recording movies.
Marker Settings
Sets the marker displayed on the monitor or
viewfinder when recording movies.
Auto Review
Sets auto review to display the captured image after
shooting.
DISP Button
Sets the type of information to be displayed on the
monitor or in the viewfinder by pressing DISP on the
control wheel.
Peaking Level
Enhances the outline of in-focus ranges with a
specific color when focusing manually.
Peaking Color Sets the color used for the peaking function.
Exposure Set. Guide
Sets the guide displayed when exposure settings are
changed in the shooting screen.
Live View Display
Sets whether or not to reflect settings such as
exposure compensation in screen display.
AF Area Auto Clear
Sets whether the focus area should be displayed all
the time or disappear shortly after the focus is
achieved.
Disp. cont. AF area
Sets whether or not to display the focus area in
[Continuous AF] mode.
Phase Detect. Area Sets phase detection AF area.
Pre-AF
Sets whether or not to perform auto focus before the
shutter button is half pressed.