Help Guide

being charged, and then insert the same battery pack firmly back into the
product. If the charge lamp flashes again, this may indicate a faulty battery or
that a battery pack other than the specified type has been inserted. Check that
the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with
a new or different one and check that the newly inserted battery is charging
correctly. If the newly inserted battery is charging correctly, the previously
inserted battery may be faulty.
If the charge lamp flashes even if the AC Adaptor is connected to the product
and the wall outlet (wall socket), this indicates that charging has stopped
temporarily and is on standby. Charging stops and enters standby status
automatically when the temperature is outside of the recommended operating
temperature. When the temperature returns to the appropriate range, charging
resumes and the charge lamp lights up again. We recommend charging the
battery pack in an ambient temperature of between 10°C to 30°C (50°F to
86°F).
[270] How to Use Precautions/This product Precautions
Notes on memory card
If you repeatedly shoot and delete images for a long time, fragmentation of data
in a file in the memory card may occur, and movie recording may be interrupted
in the middle of shooting. If this happens, save your images to a computer or
other storage location, then execute [Format].
Memory card formatted with a computer is not guaranteed to operate with the
product.
Data read/write speeds differ depending on the combination of the memory
card and the equipment used.
We recommend backing up important data, such as to a hard disk of a
computer.
Do not attach a label on the memory card itself nor on a memory card adaptor.
Do not touch the terminal section of the memory card with your hand or a metal
object.
Do not strike, bend or drop the memory card.
Do not disassemble or modify the memory card.