Help Guide

1. MENU → (Setup) → [HDMI Settings] → [ REC Control] → desired
setting.
Menu item details
On:
The camera can send a recording command to an external
recorder/player.
The camera is sending a recording command to an external
recorder/player.
Off:
The camera is not able to send a command to an external recorder/player to
start/stop recording.
Note
Available for external recorders/players compatible with [ REC Control].
When [ TC Output] is [Off], [ REC Control] is set to [Off].
Even when is displayed, the external recorder/player may not work
properly depending on the settings or status of the recorder/player. Check if the
external recorder/player works properly before use.
[202] How to Use Changing settings Setup menu
HDMI Audio Out. (movie)
When the camera is connected to an external device such as a television via an
HDMI cable (sold separately), the audio picked up by the camera’s microphone is
output to the external device during movie shooting and standby mode. During
shooting, you can check both the image and sound from the external device.
Standby for movie shooting
This is the state before you start movie shooting by pressing the MOVIE button,
after turning the mode dial to (Movie) and setting the values for shutter speed
and aperture. The icon “STBY” is displayed on the screen.
1. MENU→ (Setup)→[HDMI Settings]→[ HDMI Audio Out.]→desired