Help Guide

-2 to +2:
When you select “-,” the viewfinder screen changes to a warmer color, and when
you select “+,” it changes to a colder color.
[183] How to Use Changing settings Setup menu
Gamma Disp. Assist
Movies with S-Log gamma are assumed to be processed after shooting in order to
make use of the wide dynamic range. They are therefore displayed in low contrast
during shooting and may be difficult to monitor. However, using [Gamma Disp.
Assist], contrast equivalent to that of normal gamma can be reproduced. In
addition, [Gamma Disp. Assist] can also be applied when playing back movies on
the camera's monitor/viewfinder.
1. MENU → (Setup) → [Gamma Disp. Assist].
2. Press the top/bottom of the control wheel and select the desired setting.
Menu item details
Off:
Does not apply [Gamma Disp. Assist].
Auto:
Displays movies with an [S-Log2→709(800%)] effect when the gamma set in
[Picture Profile] is [S-Log2]. [Gamma Disp. Assist] is not applied when the gamma
is set to other than [S-Log2].
S-Log2→709(800%):
Displays movies with an S-Log2 gamma reproducing contrast equivalent to
ITU709(800%).
Note
When [Gamma Disp. Assist] is set to [Auto] during playback, the picture is
displayed based on the current gamma setting in [Picture Profile] instead of
auto-detecting the gamma value of the movie.