Help Guide

2. Press the shutter button to capture a still image.
If you press the shutter button halfway down, the remaining number of still
images you can shoot will be displayed on the screen.
While shooting still images, the message [CAPTURE] is displayed on the
screen.
3. Press the MOVIE button again to finish recording the movie.
Hint
The image size or image quality of the still images can be selected from MENU
→ (Camera Settings)→[Img. Size(Dual Rec)]/[Quality(Dual Rec)].
Note
Dual Rec may be unavailable depending on the recording setting or mode
setting.
Depending on the memory card you use, it may take a while to record a still
image.
The shutter button sound may be recorded.
You cannot use the flash while using Dual Rec.
[114] How to Use Using shooting functions Recording movies
Auto Dual Rec
Sets whether or not to automatically shoot still images when shooting movies.
Shoots when impressive compositions, including people, are detected. This
function may also record versions of the automatically shot images that have been
trimmed into optimal compositions. When a trimmed image is recorded, both the
image before trimming and the trimmed image will be recorded.
1. MENU → (Camera Settings) → [Auto Dual Rec] → desired setting.
2. Press the MOVIE button to start movie recording.
Still images will be shot automatically. While capturing a still image, the
message [CAPTURE] is displayed on the monitor.
3. Press the MOVIE button again to finish movie recording.