User manual

• Accessories supplied do not meet water-proof, dust-proof, and shock-proof

specifications.

Notes before using the camera under/near water

• Make sure that no foreign matter such as sand, hair, or dirt gets inside the

battery cover or memory card/connector cover. Even a small amount of

foreign matter may lead to water entering the camera.

• Confirm that the sealing gasket

and its mating surfaces have not

become scratched. Even a small

scratch may lead to water

entering the camera. If the

sealing gasket or its mating

surfaces become scratched, take

the camera to an authorized

repair shop to have the sealing

gasket replaced for a fee.

• If dirt or sand gets on the sealing

gasket or its mating surfaces,

wipe the area clean with a soft

cloth that will not leave behind

any fibers. Prevent the sealing gasket from becoming scratched by touching

it while charging a battery or using a cable.

• Do not open/close the battery cover or memory card/connector cover with

wet or sandy hands or near water. There is a risk this will lead to sand or

water getting inside. Before opening the cover, perform the procedure

described in “Cleaning after using the camera under/near water.”

• Open the battery cover or memory card/connector cover with the camera

completely dry.

• Always confirm that the battery cover or memory card/connector cover has

been securely locked.

Notes on using the camera under/near water

• Do not subject the camera to shock such as from jumping into water.

• Do not open and close the battery cover or memory card/connector cover

while under/near water.

• This camera sinks in water. When using, place your hand through a strap,

etc. to prevent the camera from sinking.

• The water-proof/dust-proof performance is not ensured when the battery

cover or memory card/connector cover is open.

1 Sealing gasket

2 Surface contacting the

sealing gasket