Computer Drive User Manual

Closing the Computer

Refer to your computers user manual for instructions on how to close

the computer.

Using Discs

Storing Discs

• Do not store the disc in a location subject to:

– high humidity

– high temperature

– excessive dust

– direct sunlight

Care of Discs

• Hold the disc by its edge. Do not touch the surface.

• Data cannot be recorded if the recording surface is contaminated.

 Analogue AUDIO OUT connector

The pin assignment for the audio out connector is as follows:

 IDE INTERFACE connector

1 Firmly insert one end of the interface cable into the INTERFACE

CONNECTOR.

2 Attach the other end of the cable to the PRIMARY or

SECONDARY IDE interface connectors on the computers main-

board.

Refer to your computers user manual for more information on

where these connectors will be located.

pin Audio Signal

1 R signal

2 ground

3 ground

4 L signal

INTERFACE

CONNECTOR

Pin 1

INTERFACE cable