Product Guide / Specifications

Signal-to-noise ratio 90 dB
Frequency response 10  20,000 Hz
Wow and flutter Below measurable limit
General
Design and Specifications subject to change without notice.
CD Player Section
FM
Tuning range 87.5  107.9 MHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz
Usable sensitivity 11 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 65 dB (stereo), 68 dB (mono)
Harmonic distortion at 1 kHz 0.7% (stereo), 0.5% (mono)
Separation 33 dB at 1 kHz
Frequency response 30  15,000 Hz
AM
Tuning range 530  1,710 kHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity 30 µV
Outputs Speaker outputs
Speaker impedance 4  8 ohms
Maximum power output 52 W × 4 (at 4 ohms)
Outputs Power antenna relay control terminal
Inputs Telephone ATT control terminal
Tone controls Bass ±10 dB at 20 Hz
Treble ±10 dB at 20 kHz
Power requirements 12 V DC car battery (negative ground)
Dimensions Approx. 178 × 50 × 177 mm
(7 1/8 × 2 1/8 × 7 in.) (w/h/d)
Mounting dimensions Approx. 182 × 53 × 161 mm
(7 1/4 × 2 × 6 3/8 in.) (w/h/d)
Mass Approx. 1.2 kg
Supplied accessories Parts for installation and connections (1 set)
Front panel case (1)
This unit cannot be connected to a digital preamplifier or an equalizer.
CDX-MP30
FM/AM Compact Disc Player
Power Amplifier Section
Note
2002 SONY MOBILE
PRODUCT GUIDE
-
 CD TEXT
®
 XM Ready
 SSIR-EX Tuner
MP3 & CD-RW Playback
 CD/MD Control w/Custom File memory
 MBP (My Best Position)
 D-Bass
 Supplied Wireless Card Remote (RM-X114)
 Optional Wired Rotary Remote (RM-X4S)
 8fs, 1-Bit D/A Converter
 60 Degree Install
 18FM + 12AM memory presets
 Xplod
®
Power: 52W x 4
 F/R Preouts
 13-segment, 2-color LCD, clock
 Dual knob design
 Detachable Faceplate
Indicates step-up
MS Section
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
23 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5%
total harmonic distortion.
Plug shown with wires facing viewer.
Pin Number Wire Color Description
1 White Left front +
2 Green Left rear +
3 Purple Right rear +
4 Gray Right front +
5 Blue/white AMP Remote
6 Blue ANT Remote
7 Red Accessory
8 Black Ground
9 White/black Left front -
10 Green/black Left rear -
11 Purple/black Right rear -
12 Gray/black Right front -
13 Sky blue ATT
14
15
16 Yellow Battery
Harness Plug Configuration
16
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15

Summary of content (2 pages)