Operating instructions

7
 SOURCE/OFF button
Press to turn on the power/change the
source (Radio/CD/USB/SensMe™*
1
/
AUX).
Press and hold for 1 second to turn off
the power.
Press and hold for more than 2 seconds
to turn off the power and the display
disappears.
 (BROWSE) button page 9, 19
To enter Quick-BrowZer™ mode.
 Control dial/select button
page 22, 25
To adjust volume (rotate); select setup
items (press and rotate).
 Receptor for the remote
commander
 Display window
 OPEN button page 5, 13
 USB connector page 13, 15, 16
 (BACK)/MODE button
page 9, 10, 17
Press to return to the previous display/
select the radio band (DAB/FM/MW/
LW).
Press and hold to enter/cancel the
passenger control.
 ZAP button page 20
To enter ZAPPIN™ mode.
 COLOR button page 20
To select the preset colors (press);
register custom color settings (press and
hold).
 AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button
page 11, 12
To set AF and TA (press); select PTY
during DAB or FM reception (press and
hold).
 Number buttons
Radio:
To receive stored DAB services or radio
stations (press); store DAB services or
radio stations (press and hold).
CD/USB/SensMe™:
/: ALBUM / (during MP3/
WMA/AAC playback)
To skip an album/change
SensMe™ channels (press); skip
albums continuously (press and
hold).
: REP*
2
page 18
: SHUF page 18
: PAUSE
To pause playback. To cancel,
press again.
 DSPL (display)/SCRL (scroll) button
page 11, 13, 14, 17
To change display items (press); scroll
the display item (press and hold).
 AUX input jack page 27
 (eject) button
To eject the disc.
 Disc slot
Insert the disc (label side up), playback
starts.
*1 When a USB device set up for the SensMe™
function is connected.
*2 This button has a tactile dot.
Note
If the unit is turned off and the display
disappears, it cannot be operated with the remote
commander unless  on the unit
is pressed, or a disc is inserted to activate the unit
first.