User Guide
17
Actual total number: Sony CDX-C810DSP (E) 3-856-118-41 (2)
EN
CD/MD Changer
Playing tracks repeatedly
— Repeat Play
You can select:
• REP 1 to repeat a track.
• REP 2 to repeat a disc.
• REP 3 to repeat all the discs in the current
changer.
1 During playback, press (SHIFT). Then
press (3) (PLAY MODE) repeatedly until
“REP” appears.
2 Press (4) (n) repeatedly until the
desired setting appears.
z REP 1 z REP 2 z REP 3
REP OFF Z
Repeat Play starts.
To go back to the normal playback mode,
select “REP OFF” in step 2 above.
Playing tracks in random
order
— Shuffle Play
You can select:
• SHUF 1 to play the tracks on the current disc
in a random order.
• SHUF 2 to play the tracks in the current
changer in a random order.
• SHUF 3 to play all the tracks in a random
order.
1 During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“SHUF” appears.
2 Press (4) (n) repeatedly until the
desired setting appears.
z SHUF 1 z SHUF 2 z SHUF 3
SHUF OFF Z
Shuffle Play starts.
To go back to the normal playback mode,
select “SHUF OFF” in step 2 above.
Creating a program
— CD Program Memory (CD changer with
program memory function)
You can play the tracks in the order you want
by making your own program. You can make
two programs: Program 1 and Program 2. You
can select up to 12 tracks in each program. You
can store the programs in memory.
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
Program edit mode
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2 Select the track you want.
1 Press (SOURCE) repeatedly to select
the changer.
2 Press (SHIFT), then press the number
button to select the disc.
3 Press (SHIFT).
4 Press either side of (SEEK/AMS) to
select the track.
3 Press (5) (ENTER) momentarily.
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
Notes
• “*Wait*” appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• “*Mem Full*” appears in the display when you try to
enter more than 12 tracks into a program at one time.
SUR
EQ
PLAY MODE ENTER
DISC
TRACK
2 3 P1.‚1
CD2
µ
SUR
EQ
PLAY MODE ENTER
+ENTER+
P1
SUR
EQ
PLAY MODE
DISC
TRACK
3 2 P1.‚2
CD2