SONY 3-856-120-12 (1} @ FM/AM Compact Disc Player Operating Instructions _“m Owner's Record The model and serial numbers are located o the bottom of the unit, Record the serial number in the space provided below Realer to thus numbers whenever you cal upon your Sony dealer regarding this product Model No. Coxcomb Serial No. || For installation and connections, see the supplied institutionalization manual.
Warning This equipment has bun tested and found fo comply with the limits for a Class B digital devise, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate adhesion frequency energy and, if not installed and used in accordance with the instructions, nay cause harmful interference ta radio communications.
Table of Contents This Unit Only Getting Started Resetting the ani Detaching the front panel Preparing the rotary remote Setting the clock Player Listening toa CD Playing a CD in various modes Creating a program €D Program Memory Radio Memorizing stations automatically Best Tuning Memory (ETM) Memorizing only the desired stations Receiving the memorized Sta lions Storing the station nam, Station Memo Locating a station by name ~ List-up Other Functions Using the rotary remote.
Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ball-point pen. Reset button Note When yous connect the pour supply cons to the it ar reset e wit, wait for abut 10 seconds before you insert @ disc.
Setting the clock The clock has a 12-hour digital indication Example: Set the clock to THOTH 1 Press (SHIELDS, then press (2) (SET UP). SE7 . c Lock ) @ Press (D ¢ 567 The hour digit flashes © Set the hour. forward to go back T 3o © Press (4 () YL Lol The minute digits dash. © Set the minute, Ford) to g forward [waw) t0.go back YLl 2 Press (HIE. 1aa8 The clock starts, Note {f the POWER SELECT suits os the bottoms of the unit is ek bo the @ position, turn the power n first, then set the clock.
Locating a specific point in a track — Manual Search During playback, press and hold either side of (SEXTANS. Release the button when you have found the desired point. Rise | To search forward =] To search backward Note append in the display, that sane yow e trenched fo the beginning or the rid of Hhe dies and you cannot go any further Playing a CD in various modes You can play CUs in various modes: * INTRO (Intro Scan) lets you play the first 10 seconds of all the tracks.
3 Press (8) () repeatedly unit the desired program appears. Program 1 playback PG + Program 2 playback Programs 1 and 2 playback L7 b o LOUIE Normal playback T3 . PEMBROKE Program Play starts. Y0 4o back to the normal playback mode, select “PG-OFF” in step 3 above. Note “NQ DATA" appears in the display if no track is stored in the pro grant, Erasing the entire program 1 Press (TOUGHIE, then press (3) (PLAY MODE) for two seconds. &3 m 401 RPN 4 “P 17 shows Program 1 is selected.
Erasing the tracks in the program 1 Press (SHOD, then press (3) (PLAY MODE} for two seconds. SRR “P 1~ shows Program 1is selected o select Program 2, press (3) repeatedly until “P 2" appears. 2 Press select the track you want to erase. Track sot number oy WO e STy The Traci currently registered in slot 6 of aerogram 1. 3 press (5 (ENTER) for two seconds. When you erase a track from a slot umber, FEL 4 To continue erasing tracks, repeat steps and.
Note I on try e store another stating an the same preset number Button. the provincially stared station will be erased. e Receiving the memorized stations 1 Press (SOURCE) repeatedly 1o defect the desired band. 2 press the number button ((T) to (i)} momentarily where the desired station is stored. If you cannot tune in a preset station Press either side of (SEER VANS) momentarily to search for the station {automatic tuning). Scanning stops when the unit receives a station.
Displaying the station name Press (PLOT) during radio reception. Fri JURISTS Each time you piss (B3P0, the item changes as follows: Bun name*— Frequency —» Clock] S 4t stationer name of @ station i nof stored, "NC NAME" appears in the display for one second. Erasing the station name 1 Tune in any station and press (TST) for two seconds. 2 Press (550 for two seconds. 3 Press select the name that you want to erase. 4 press (5) (ENTER) for two seconds. The name is erased.
By rotating the control while pushing (the PRESET/DISC control} Rotate the control while pushing it to: + Receive the stations memorized on the number buttons. «Change the disc. Other operations Rotate the VOL control to adjust the volume. Press (QUITE) to mute the sound. Press (TFE) to turn off the unit. Press (BSD to change the displayed items. Press (§OUE) €0 adjust the volume and sound menu. Press (LST) to display memorized names.
Changing the sound and display settings You ¢an set * AMBER/GREEN 1o change the illumination color to amber ot green. «BEEP to turn on or off the beeps * DIM (Dimmer} to change the brightness of the display. * FOUNDLING {dual information) to display the clack and the play mode at the same time {ON} or to display the information alternately (OFF). + LOUD (Loudness) to enjoy bass and treble even at low volume. Bass and treble will be reinforced.
Displaying the recording date of the currently selected MD Press (BFF) for two seconds during MO playback. The recording date of the track is displayed for abut three seconds, Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (STEERSMAN ) once for each track you ‘want to skip. T Yo locate succeeding tracks (e} Yo locate previous tracks Locating a specific point in a track Manual Search During playback, press and hold either side of (SEAMS ).
Labeling a CD — pics Memo {CD changer with custom file function} You van label each dies with a personalized name. Yau can enter up to eight characters for disc. 1 you label a CT, you van locate a disc by name and select the specific tracks for playback (page 15). 1 Play the €D and press (UST) for two seconds. Enter the characters. © Press () to select the desired characters.
Notes O a s asinine s bins displaced e fire s mobs, syl goes buck b s oy sisal playacting mde. To b e dispel, press COPE 15 MD playback * The track maws are not displace chert are s sides i Hie mag applies in the dissimilar. o ifa dies hos 1 oo a appears in the dispel « U e dies information s oot beans read by the it “NOT READY” appears in theosophist o loud the ise, e ey button, e choose the disc that s 10t Been clouded. * The information appears only i upper cases.
Creating a program €D Program Memory (CD changer with program memory function) You can play the tracks in the order you want by making your own program. You can make fwa programs: Program 1 and Program 2. You can select up to 12 tracks in each program. You can store the Programs in memory. 1 Press (SHED, then press (37 (PLAY MODE) for two seconds. Program edit mode CHE shows Program 1 ix selected. H you have labeled the disc, the bank edit mode appears. Press (3 (PLAY MODE) to display “P 1" above.
2 Press (7 repeatedly until “DEL” appears. IEL Ta erase Program 2, press () repeatedly until “PGM 27 appears 3 Press (5 (ENTER) for two seconds. Py 4G TARTAR The entire program is erased. 4 When you finish erasing programs, press (@ (PLAY MODE) for two seconds. Adding tracks to the program 1 Press (SHAFT, then press (55 (PLAY MODE} for two seconds. PHF “P 1" shows Program 1 is selected. D0y ey P 1f you have labeled the disc, the bank edit mode appears. Press (3 (PLAY MODE) to display "P 1" above.
tbsp With the optional XDP-U50D connected ‘The optional XDP-US0D lets you add some effects to the sound field of the currently selected source. Selecting a surround menu You can select a desired surround menu to best fit the audit source. The following menus can simulate different sound fields and enhance the sound so that you can feel as if you are in a live concert. Surround menu Adjusting the effect level 1 Press (SOURCE’ to select 3 source (radio, CD or MD), 2 Press (GOURD) for two seconds.
4 Press (ST for twb seconds. When the effect sating is complete, the display goes back to the normal playback mode. Playing the disc with the stored surround menu 1 Press (SHIFT), then press (3) (PLAY MODE) repeatedly until “O.FILE" appears. 2 Press () to select the After five seconds, the display goes back to the normal playback mode. To cancel to play the dies with stored surround men, select instep 2.
Adjusting the fared (FAD) Normally, with the D51 mode on, the volume of the output sound from the rear speakers is lowered automatically to improve the efficiency of the listening position setting, If you want to raise the rear speaker volume, adjust the fared. 1 Follow steps “Selecting a surround menu” (page 18). 2 Press (SOUND) repeatedly until “EAD™ appears, 3 press adjust the fared.
3 Press adjust the volume. After three seconds, the display goes back to the normal playback mod. Adjusting the turn-over frequency You can adjust the bass and treble tum-over frequencies. Turn.over frequency frequency (Hz) 1 Press (SOURCE) to select a source {radio, £D or MD). 2 press (STONED for two seconds. 3 Press (STUNG) repeatedly until “BAS” or “TRE" appears, Bass adjusting mode BAS 34 ‘Treble adjusting mode TRE L 3 4 press select the turn-over frequency.
Video With the optional TV tuner and TV monitor connected Watching the TV 1 Press (SOURCE) repeatedly unfit “Tv* appears. 2 Press either side of (SEER ERE) to select the desired TV band. Watching the video Press (SOURCE) repeatedly until "VICED 17 appears. Play back the video. Note "DIVED T pears if the VICED Y testings] of tire TV Memorizing TV channels automatically Best Tuning Memory (BTM) The unit selects the TV channels with the strongest signals and memorizes them i the order of their frequency.
Notes o It Douay bake sampan o Deface it display. « The TV program does 1ot appear during list display. * The contents of the preset at emery cannot b listed lynx the wit s in the considerations plug mode (page 23 options s 1 Turning off the display During radio reception, press (LIST) again. During TV reception, the list display on the TV monitor will automatically him off after a few seconds. Displaying the information stored on discs Press (LIST) momentarily during CD/MD playback.
Additional Information Precautions « If your car was parked in direct sunlight resulting in a considerable ices in temperature inside the car, allow the unit to cool off before operating power is being supplied to the unit, check the connections first. If everything is in order, check the fuse, = if no sound comes from the speakers of two-speaker systems, set the fared control to the center position.
Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean, To present this, open the front panel by pressing (RELEASE) then detach it and clean the connectors with a cotter swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.
A —— Location of controls Refer to the pages for details [T] SEAMS (seek/Automatic Music Sensor/manual search) button 9,13,15,16,12, 22 [2] OFF bunion 4,5 [3] sound button (volume/sub output level/bass/ treble/balance/fader control) buttons 5, 9,10, 11, 14, 18, 19,20, 21 (5] Display window [6] SPLIT {display made change) button 5, 3.
Optional wireless remote (RM-X41) The buttons of the wireless remote work the same functions as these on this unit. OFF button (8] MUTE button DIR button 7] (= & buttons does not work with this unit, 8] SPLIT button SOURCE button 73] SOUND button SEAMS button [E] PRESET/DISC button You cannon do the missal search and manual tuning with the remote. When the POWER SELECT switch is se to the.
e R — Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 15 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from kHz with no more than 1 % total harmonic distortion. Other specifications €D player section o Compact disc digital audio system Signalization ratio 90 dB Frequency response 10 20,000 Hz.
Troubleshooting guide The fallowing check will help vou remedy the problems that you may encounter with your unit Before going though the checklist below, check the connection and operating procedures. General Problem Cause/Solution No sound. * Adjust the volume with * et the fared contra to the center position for two-speaker systems. The contents of the memory * The parer cord of battery has been disconnected. have been erased. « The reset button has been pressed.
Error displays (when the optional CD/MD changer is connected) The following medications will flash for about five seconds, and n alarm soars will be heard. Display Cause Solution NO MAG The dies magazine is nof inserted in the CD/MD changer. Expertise the disc magazine with discs into the CD/MD changer. NO DISC No dies is inserted in the CD/MD changer. insert the discs in the CD/MD changer. ERROR" A CD is dirty or inserted upside down.© Clean or inert the CI correctly.
e Index A Automatic Music Sensor (AMS) &, 13 Automatic tuning 9 Alliterate 12 Balance 11 Bass 11,20 Bank Play 15 Beep tone 12 Best Tuning Memory (BIM) 8,22 C Caution alarm 4 Ch playback 5,12 CD program memory 6, 16 Clack 5 b Digital Signal Processor (D&M 18 Dimmer 12 Direct dies selection 13 Discommode 14 Disc Sean 13 Display 5,49, 10,12,14,23 DSP custom file 18 Dual information 12 E Effect 18 FIGHT Wader 11,20 Front panel 4 Fuse 24 LLK Rumination color 12 Intro Scan 6,13 L Line output lever 21 List up 10,1
