Operation Manual

20
Actual total number: Sony CDX-C910 (E) 3-856-715-21 (2)
EN
Selecting the listening
position
You can set the time for the sound to reach the
listeners from the speakers.
The unit can simulate a natural sound field so
that you can feel as if you are in the center of
the sound field wherever you sit in the car.
Display
window
LP1
All
LP2
Front
LP3
Front R
LP4
Front L
LP5
Rear
Center of sound
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
1 Press (SOUND) momentarily until “LP1”
appears.
2 Rotate the dial to select the desired
listening position.
The listening positions appear in the order
shown above.
After three seconds, the display goes back
to the normal playback mode.
Adjusting the listening position
1 Press (SOUND) for two seconds.
2 Rotate the dial to select the desired
listening position.
3 Press (4) (n).
4 Rotate the dial to adjust the center of
the sound field to the left or right. Then
set the center of the sound field.
1
3
2
LP1
L R
SUREQ
005
Center moves to the L (left)
Center moves to the R (right)
LP1
All
SUREQ
5 Press (4) (n).
6 Rotate the dial to adjust the center of
the sound field to the front or rear.
7 Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode display appears.
Adjusting the fader (FAD)
Normally, with the DSP mode on, the volume
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
1 Follow steps 1 to 3 of “Selecting the
surround menu” (page 18).
2 Press (SOUND) momentarily until “FAD”
appears.
3 Rotate the dial to adjust the fader.
After three seconds, the display goes back
to the normal playback mode.
Adjusting the volume of
the subwoofer(s)
1 Press (SOURCE) to select a source (radio,
CD or MD).
2 Press (SOUND) repeatedly until “SUB”
appears.
3 Rotate the dial to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.
LP1
R F
SUREQ
Center moves to the R (rear)
Center moves to the F (front)
Decreases front speaker volume
Increases front speaker volume