3-868-181-21 (1) Portable CD Player Operating Instructions About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see “Accessories (supplied/optional).
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority.
Table of Contents Getting started Locating the Controls .................................. 4 Playing a CD 1. Connect your CD player. ......................... 6 2. Insert a CD. ............................................. 6 3. Play a CD. ............................................... 6 Playback options Playing tracks repeatedly (Repeat play) ...... 9 Playing a single track (Single play) ............. 9 Playing tracks in random order (Shuffle play) ...........................................
Getting started Locating the Controls For details, see pages in parentheses. CD player (front) 1 Display (pages 7, 9 - 12) 2 PLAY MODE button (pages 8 - 10) 3 ./> (AMS/search) buttons (pages 7, 9, 10) 7 u (play/pause) button (pages 6, 7, 10) 8 DC IN 4.
CD player (rear) Getting started qh AVLS switch (page 12) qj Battery compartment (page 16) Remote control (for models supplied with the remote control) qk x (stop) button (pages 7, 13) w; N(play)•> (AMS/search) button (pages 6, 7, 9, 10) ql VOL (volume) +/– button (page 6) wa HOLD switch (page 12) ws .(AMS/ search) button (pages 7, 9, 10) Note Use only the supplied remote control. You cannot operate this CD player with the remote control supplied with other CD players.
Playing a CD You can also use rechargeable batteries, dry batteries and a car battery as a power source. 1. Connect your CD player. to an AC outlet 1 Connect the AC power adaptor. 2 Connect the headphones/earphones. u button For models supplied with the remote control. AC power adaptor • Connect the plug of the headphones/ earphones to the remote control. • Connect the headphones/earphones to the remote control firmly. A loose connection may cause noise during playback. to DC IN 4.
Press u x/CHG*2 .once quickly*2 .repeatedly*2 > once quickly*2 > repeatedly*2 Hold down .*2 Hold down >*2 Playing a CD To Play/Pause Stop Find the beginning of the current track (AMS*1) Find the beginning of the previous tracks (AMS) Find the beginning of the next track (AMS) Find the beginning of the succeeding tracks (AMS) Go backwards quickly Go forward quickly *1 Automatic Music Sensor *2 These operations can be done during both play and pause.
Playback options You can enjoy various ways of playback using PLAY MODE and REPEAT/ENTER. PLAY MODE button Each time you press the button, you can change the playback mode. “No indication” (Normal play) “1” (Play a single track) REPEAT/ENTER button “SHUF” (Play tracks in random order) “PGM” (Play tracks in your favorite order) REPEAT You can repeat play that is selected using PLAY MODE. ENTER You can select tracks for PGM play mode. u button .
Playing tracks repeatedly (Repeat play) You can play tracks repeatedly in normal, single, shuffle and PGM play modes. During playback, press REPEAT/ENTER. Playing a single track (Single play) During playback, press PLAY MODE repeatedly until “1” appears. Playing tracks in random order (Shuffle play) During playback, press PLAY MODE repeatedly until “SHUF” appears. 9 Playback options Note on ./> During Repeat play, you can locate the first track after the last track by pressing > repeatedly.
Playing tracks in your favorite order (PGM play) You can program the CD player to play up to 64 tracks in your favorite order. 1 During playback, press PLAY MODE repeatedly until “PGM” appears. 2 Press . or > to select a track. Playing order Track number 3 Press REPEAT/ENTER to enter the selected track. “00” appears and the playing order increases by one. 4 5 Repeat steps 2 and 3 to select the tracks in your favorite order. Press u to start the PGM play.
B Available features G-PROTECTION function Emphasizing the bass sound (SOUND) The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. This function provides a higher level of shock protection than the traditional one. While jogging, be sure to hold your CD player with the OPEN switch facing upward. You can emphasize the bass-boosted sound. Press SOUND to select “BASS “BASS .
Protecting your hearing Locking the controls (AVLS) (HOLD) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. You can lock the controls on your CD player to prevent accidental button presses. Set AVLS (in the battery compartment) to “LIMIT.” Flashes when the volume is turned up and beyond a certain level. To turn off the AVLS function Set AVLS to “NORM.” Slide HOLD in the direction of the arrow. Displayed when the HOLD function is working.
Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. 2 Connect the power source while pressing x/CHG on the CD player or x on the remote control. Available features To turn on the beep sound Remove the power source and then connect the power source without pressing x/CHG or x.
B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. to LINE OUT Connecting cord Left (white) Right (red) Stereo system, cassette recorder, radio cassette recorder, etc.
Using your CD player in a car You can use your CD player in a car by connecting it to the car cassette deck. You cannot use the car mount plate for this CD player. When you use your CD player in a car, install it securely in a location that does not interfere with your driving.
B Connecting a power source You can use the following power sources: • Rechargeable batteries • AC power adaptor (see “Playing a CD”) • LR6 (size AA) alkaline batteries 3 For the battery life and charging time of the rechargeable batteries, see “Specifications.” x/CHG button Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player.
To remove the rechargeable batteries Remove the batteries as illustrated below. When to charge the rechargeable batteries You can check the remaining power of the batteries in the display. Note on carrying the rechargeable batteries Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit.
Using dry batteries Use only the following dry battery type for your CD player: • LR6 (size AA) alkaline batteries Note Be sure to remove the AC power adaptor when using the dry batteries. 1 Open the battery compartment lid. 2 Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment. To remove the batteries Remove the batteries in the same way as rechargeable batteries. When to replace the batteries You can check the remaining power of the batteries in the display.
B Additional information On headphones/earphones Precautions On safety • Should any solid objects or liquid fall into the CD player, unplug it and have it checked by qualified personnel before operating it any further. • Do not put any foreign objects in the DC IN 4.5 V (external power input) jack. On the CD player • Keep the lens on the CD player clean and do not touch it. If you do so, the lens may be damaged and the CD player will not operate properly.
Troubleshooting Should any problem persist after you have checked these symptoms, consult your nearest Sony dealer. Symptom Cause and/or corrective actions The volume does not increase even if you press the VOLUME + button repeatedly. c Set the AVLS switch to “NORM.” (page 12) c The headphones/earphones are connected to the LINE OUT jack. Connect them to the i/REMOTE jack. (page 6) c Connect the plugs firmly. (page 6) c Plugs are dirty. Clean the plugs with a dry soft cloth periodically.
Specifications System Compact disc digital audio system Laser diode properties Material: GaAlAs Wavelength: λ = 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) D-A conversion 1-bit quartz time-axis control Frequency response 20 - 20,000 Hz 307) +1 –2 dB (measured by EIAJ CP- • AC power adaptor (DC IN 4.
Accessories Optional accessories (supplied/optional) Supplied accessories For the area code of the location in which you purchased the CD player, check the upper left side of the bar code on the package.
Sony Corporation
