SON'Yo 3-769-921-23 (2) Compact Disc Player DIGITAL CDP-C40 CDP-C50 Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. CDP-C50 Difference between the CDP-C40 and the CDP-C50 This manual covers the CDP-C40 and the CDP-C50. Their performance and operation are identical except that for the CDP-C40, a remote commander is not supplied and a headphones jack, a phone level control, and a timer switch are not provided.
Onsafety • Operate the unit only on 120 V AC, 60 Hz. • Should any liquid or solid object fail into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • Unplug the unit from the wall outlet if it will not be used for a long time. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself. • As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet.
• Turn off the amplifier before making connections. • Be sure to insert the plugs firmly into the jacks. Loose connections may cause hum and noise. • Leave a little slack in the connecting cord to allow for inadvertent shock or vibration. • Connect the red plug of the supplied connecting cord to the right-channel jack (R) of the amplifier and the white plug to the left-channel jack (L).Otherwise, the right and left channels will be reversed.
Control Identification Refer to the pages indicated in • for details. DISC SELECT buttons _) _ I_1_1_ (AMS*/RMS* *) buttons G)® TIME button ® ,'--DISC SKiP button O (D Display window POWER switch _) PHONE LEVEL control (CDP-C50 only) ] f _d HEADPHONES jack (CDP-C50 only) TIMER switch ® (CDP-C50 only) __ OPEN/CLOSE button Disc compartment , . O® • (stop) button _) Remote control sensor *AMS is the abbreviation of AutOmatic Music Sensor.
Control Identification TIME button _) SHUFFLE PLAY button (D r button (_ DISC SELECT buttons (_) (_) (program) button (_) TRACK selectors (numeric buttons) (D (_)-- 3K (program check) button (_ (program clear) button (_) I_ (play) button ( II (pause) button _) (AMS) buttons (D (_) • (stop) button ( (manual search) buttons (I) Once the power switch is turned on, you can remotely control various functions of the player from a distance. Use the remote commander supplied with the CDP-C50.
1 Depress POWER. 2 Press The compartment will open. 3 4 press DISC SKIP so that the Disc 1 tray rotates into the front position. Put the disc in the DISC 1 tray with the label side up. 5 6 To play more than one disc, repeat steps 3 and 4 to put additional discs in the order you want. Press DISC SELECT 1. The compartment will close and play will begin from the first selection on the disc in the DISC 1 tray. Selection No, being played I _ r Index No. Appears under the tray No.
To display the total number of selections If you press __ or the compartment itself to close the compartment, the total number of selections and the total playing time are displayed for a few seconds. To display the amount Press TIME twice. of time elapsed on the disc d -- -- 7 e 9 tO II 12 _3 t4 t_ 16 ii I_ C 12 13 _4 is / 16 J TO return to the normal display, press TIME twice, I When a disc containing more than 16 selections is inserted, _ (meaning: "over 16 selections") appears.
ByusingtheDISC SELECT buttons ortheDISC SKIPbutton during play,youcanlocatethebeginning ofanydisc. Toselect a particular disc Press the corresponding DISC SELECT button. To move to the disc tray next to the current one Locating a selection Locating a point in sequence (Manual Search) You can locate a particular point in a selection during play by monitoring the high-speed sound. To go back at high speed To go ahead at high speed <1<1pressed. Keep _ pressed. Press DISC SKIP.
1 2 Press PGM. Press the DISC SELECT button which corresponds to the disc you want. corresponds to the selection you want, ® _34s :, 'r,,i,,d To program additional selections on a same disc, repeat step 3. To program additional selections on another disc, repeat steps 2 and 3. To play the programmed selections Press • (or • II on the main unit). To return to normal PressPGMagain. play mode To insert a pause into your program (possible only with the CDP.
To program a whole disc under a single program number Simply press the DISC SELECT button which corresponds to the disc you want. The TRACK indicator will show R, which means that all the selections on the disc have been programmed under a single program number. You can play up to 32 selections in the desired order. 1 Pre.PQ.. 2 Press D. SELEOT (disc skip) to move the disc tray. :3 Choose the selection (To choose a whole by pressing t,4<1 or li,_.
For the CDP-C50: Press CHECK on the remote commander. Each time you press CHECK, a selection will be displayed for a few seconds, in the order they have been programmed. For the CDP-C40: 1 Press II. 2 Press IH_. Each time you press I_1_, a selection will be displayed for a few seconds, in the order they have been programmed. Clearing the whole program Press • once during stop, or twice during play, All the selections will be cleared.
i r_ [33 _r_q. ,___ E;3 r_ E_3 r-n C3 r_ E3 r_ r-q Fq_ C3 1 Press SHUFFLE PLAY. Shuffle play will begin. When two or more discs are in the compartment: All the discs and selections will be played in random order. After one selection is played, me next selection will be from another disc. When a single disc is in the compartment: After al the selections have been played in random order, play will stop.
You can repeat a single selection, a stngle disc or all the discs. What to be repeated Operation (during play or pause) A selection being played Press REPEAT once. [2=]r"_ A disc being played Press REPEAT twice. r_ All the discs m E2_ E=] r_ Q _ [2=] _ 1223 IZ3 C3_ REPEAT Press REPEAT three I times. r--_ To return to normal play Press REPEAT reoeatedly until REPEAT disappears. _e _n_'_nder ot the _P_ During shuffle play The repeat play function cannot be used.
1 Select the disc to be played first with DISC SELECT. begin automatically When the timer play has ended Be sure to set the TIMER switch to OFF. at the preset time. You cannot select the program or shuffle function With timer operation, only normal play is possible.
Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth lightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. Cleaning discs Before playing, clean the disc with the cleaning cloth. Wipe the disc from the center out. COMPACT DISC PLAYER System Laser Compact disc digital audio system Semiconductor laser (X = 780 nm) Emission duration: continuous Laser output Max. 44.
The following checks will assist in the correction of most problems which you may encounter with your unit. Should any problem persist after you have made these checks, consult your nearest Sony service facility. Before going through the check list below, first refer back to the connection and operating procedures. Trouble No audio from one or both channels Play does not begin. CaUSO$ Remedy Incorrect operation of the amplifier Operate correctly. Loose connection Connect the cords firmly.
