User Guide
Table Of Contents
- CCD-TR317E
- Resetting the date and time
- Checking supplied accessories
- Quick Start Guide
- Getting started
- Using this manual
- Step 1 Preparing the power supply
- Installing the battery pack
- Charging the battery pack
- Connecting to the mains
- Step 2 Inserting a cassette
- Recording – Basics
- Recording a picture
- Shooting backlit subjects (BACK LIGHT)
- Shooting in the dark (NightShot)
- Superimposing the date and time on pictures
- Checking the recording
- Playback – Basics
- Connections for playback
- Playing back a tape
- Advanced Recording Operations
- Using the wide mode
- Using the fader function
- Using special effects – Picture effect
- Using the PROGRAM AE function
- Adjusting the exposure manually
- Focusing manually
- Superimposing a title
- Making your own titles
- Editing
- Dubbing a tape
- Customizing Your Camcorder
- Changing the menu settings
- Additional Information
- Playback modes
- Changing the lithium battery in your camcorder
- Troubleshooting
- Self-diagnosis display
- Warning indicators and messages
- Using your camcorder abroad
- Maintenance information and precautions
- Specifications
- Quick Reference
- Identifying the parts and controls
- Quick Function Guide
- Index

76
Maintenance information
Cleaning the video head
To ensure normal recording and clear pictures,
clean the video heads. The video head may be
dirty when:
•The x␣ indicator and “ CLEANING
CASSETTE” message appear one after another
or the x indicator flashes in the viewfinder.
•Playback pictures contain noise.
•Playback pictures are hardly visible.
•Playback pictures do not appear.
If this happens, clean the video heads with the
Sony V8-25CLD cleaning cassette (not supplied).
[a] Slightly dirty
[b] Very dirty
Note on video heads
When the playback pictures are still contain noise
even if you have cleaned the video heads with a
cleaning cassette, the video heads may have
worn down due to long use. If this is the case,
they must be replaced with new heads. Contact
your Sony dealer or local authorized Sony service
facility.
Maintenance information and
precautions
Информация по уходу за аппаратом
Чистка видеоголовок
Для обеспечения нормальной записи и
четкого изображения следует периодически
чистить видеоголовки. Видеоголовки
возможно загрязнены, если:
• В видоискателе появляются один за другим
индикатор x и сообщение “ CLEANING
CASSETTE” или же мигат индикатор x.
• воспроизводимое изображение содержит
помехи.
• воспроизводимое изображение с трудом
различимо.
• воспроизводимое изображение не
появляется на экране.
Если это произошло, почистите видеоголовки
с помощью очистительной кассеты Sony
V8-25CLD (не прилагается).
[a] Слегка загрязнены
[b] Очень загрязнены
Примечание по видеоголовкам
Если воспроизводимое изображение все еще
содержит помехи даже после того, как Вы
почистили видеоголовки с помощью
очистительной кассеты, то, возможно,
видеоголовки уже износились вследствие
длительной эксплуатации видеокамеры. В
этом случае, их следует заменить на новые.
Обратитесь в сервисный центр Sony или в
местное уполномоченное предприятие по
обслуживанию изделий Sony.
Информация по уходу за аппаратом
и меры предосторожности
[a] [b]










