User Guide
Table Of Contents
- CCD-TR317E
- Resetting the date and time
- Checking supplied accessories
- Quick Start Guide
- Getting started
- Using this manual
- Step 1 Preparing the power supply
- Installing the battery pack
- Charging the battery pack
- Connecting to the mains
- Step 2 Inserting a cassette
- Recording – Basics
- Recording a picture
- Shooting backlit subjects (BACK LIGHT)
- Shooting in the dark (NightShot)
- Superimposing the date and time on pictures
- Checking the recording
- Playback – Basics
- Connections for playback
- Playing back a tape
- Advanced Recording Operations
- Using the wide mode
- Using the fader function
- Using special effects – Picture effect
- Using the PROGRAM AE function
- Adjusting the exposure manually
- Focusing manually
- Superimposing a title
- Making your own titles
- Editing
- Dubbing a tape
- Customizing Your Camcorder
- Changing the menu settings
- Additional Information
- Playback modes
- Changing the lithium battery in your camcorder
- Troubleshooting
- Self-diagnosis display
- Warning indicators and messages
- Using your camcorder abroad
- Maintenance information and precautions
- Specifications
- Quick Reference
- Identifying the parts and controls
- Quick Function Guide
- Index

61
Additional information Дополнительная информация
Playback modes
When you play back
The playback mode (SP/LP) is automatically
selected according to the recording system in
which the tape has been recorded. The quality of
the recorded picture in the LP mode, however,
will not be as good as the SP mode.
Foreign 8 mm video
Because TV colour systems differ from country to
country, you may not be able to play back foreign
pre-recorded tapes. Refer to “Using your
camcorder abroad” to check the TV colour
systems used in foreign countries.
Playing back an NTSC-recorded tape
You can play back tapes recorded in the NTSC
video system using the SP mode.
However, note that the following will occur
during playback of an NTSC-recorded tape.
• When playing back a tape on a TV screen, you
may not get the original colour depending on
the TV. When you play back on a Multi System
TV, set NTSC PB to the desired mode in the
menu settings.
• During playback, a black band appears on the
lower part of the viewfinder.
• You cannot play back a tape recorded in the
NTSC video system with the LP mode on a TV
screen.
•If a tape has portions recorded in PAL and
NTSC video systems, the tape counter reading
is not correct. This discrepancy is due to the
difference between the counting cycle of the
two video systems.
• You cannot edit the NTSC-recorded tape onto
another VCR.
Режимы воспроизведения
При выполнении воспроизведения
Режим воспроизведения (SP/LP) выбирается
автоматически в соответствии с форматом, в
котором была выполнена запись на ленте.
Однако, качество записанного изображения
в режиме LP не будет таким хорошим, как в
режиме SP.
Иностранные 8-мм видеоленты
Поскольку системы цветного телевидения
отличаются от страны к стране, возможно Вы
не сможете воспроизводить иностранные
предварительно записанные ленты. См.
раздел “Использование Вашей видеокамеры
за границей” для проверки систем цветного
телевидения, используемых в других странах.
Воспроизведение лент, записанных в
системе NTSC
Вы можете воспроизводить ленты,
записанные в видеосистеме NTSC, используя
режим SP. Однако, имейте в виду, что во
время воспроизведения лент, записанных в
системе NTSC, будет иметь место
следующее.
• При воспроизведении ленты на экране
телевизора Вы можете не получить
первоначальные цвета в зависимости от
типа телевизора. При воспроизведении на
мультисистемном телевизоре установите
переключатель NTSC PB на нужный режим
в установках меню.
• Во время воспроизведения в нижней части
видоискателя будет появляться черная
полоса.
• Вы не можете воспроизводить ленту,
записанную в видеосистеме NTSC, в
режиме LP, на экране телевизора.
• Если на ленте имеются участки, записанные
в видеосистемах PAL и NTSC, то
функционирование счетчика ленты будет
неправильным. Это расхождение
объясняется разницей между счетными
циклами двух видеосистем.
• Вы не можете выполнять монтаж ленты,
записанной в системе NTSC, на другой КВМ.










