User Guide
Table Of Contents
- CCD-TR317E
- Resetting the date and time
- Checking supplied accessories
- Quick Start Guide
- Getting started
- Using this manual
- Step 1 Preparing the power supply
- Installing the battery pack
- Charging the battery pack
- Connecting to the mains
- Step 2 Inserting a cassette
- Recording – Basics
- Recording a picture
- Shooting backlit subjects (BACK LIGHT)
- Shooting in the dark (NightShot)
- Superimposing the date and time on pictures
- Checking the recording
- Playback – Basics
- Connections for playback
- Playing back a tape
- Advanced Recording Operations
- Using the wide mode
- Using the fader function
- Using special effects – Picture effect
- Using the PROGRAM AE function
- Adjusting the exposure manually
- Focusing manually
- Superimposing a title
- Making your own titles
- Editing
- Dubbing a tape
- Customizing Your Camcorder
- Changing the menu settings
- Additional Information
- Playback modes
- Changing the lithium battery in your camcorder
- Troubleshooting
- Self-diagnosis display
- Warning indicators and messages
- Using your camcorder abroad
- Maintenance information and precautions
- Specifications
- Quick Reference
- Identifying the parts and controls
- Quick Function Guide
- Index

17
Getting started Подготовка к эксплуатации
Connecting to the mains
When you use your camcorder for a long time,
we recommend that you power it from the mains
using the AC power adaptor.
(1) Open the DC IN jack cover, and connect the
AC power adaptor to the DC IN jack on your
camcorder with the plug’s v mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to the mains.
PRECAUTION
The set is not disconnected from the AC power
source (mains) as long as it is connected to the
mains, even if the set itself has been turned off.
Notes
• The AC power adaptor can supply power even
if the battery pack is attached to your
camcorder.
•The DC IN jack has “source priority”. This
means that the battery pack cannot supply any
power if the mains lead is connected to the DC
IN jack, even when the mains lead is not
plugged into the mains.
Using a car battery
Use Sony DC Adaptor/Charger (not supplied).
2, 3
1
Step 1 Preparing the power
supply
Подсоединение к сетевой розетке
Если Вы собираетесь использовать
видеокамеру длительное время,
рекомендуется использовать питание от
электрической сети с помощью сетевого
адаптера переменного тока.
(1) Откройте крышку гнезда DC IN и
подсоедините сетевой адаптер
переменного тока к гнезду DC IN на Вашей
видеокамеру, так чтобы знак v на
штекере был обращен вверх.
(2) Подсоедините провод электропитания к
сетевому адаптеру переменного тока.
(3) Подсоедините провод электропитания к
сетевой розетке.
МЕРА ПРЕДОСТОРОЖНОСТИ
Аппарат не отключается от источника
питания переменного тока (электрической
сети) до тех пор, пока он остается
подсоединенным к электрической сети, даже
если сам аппарат и выключен.
Примечания
• Питание от сетевого адаптера переменного
тока может подаваться даже в случае, если
батарейный блок прикреплен к Вашей
видеокамере.
• Гнездо DC IN имеет “приоритет источника”.
Это значит, что питание от батарейного
блока не может подаваться, если провод
электропитания подсоединен к гнезду DC
IN, даже если провод электропитания и не
подсоединен к сетевой розетке.
Использование автомобильного
аккумулятора
Используйте адаптлер/зарядное устройство
постоянного тока Sony (не прилагается).
Пункт 1 Подготовка источника
питания










