User Guide

tapping it on the screen. When you tap the camera screen, a blue frame shows which face is selected

and in focus. Face detection cannot be used for all scene types. Continuous autofocus is on.

Touch focus

Touch a specific area on the camera screen to set the area of focus. Continuous autofocus is off. Touch

and hold the camera screen until the yellow focus frame turns blue, indicating that the focus is set. The

photo is taken when you release your finger.

Object tracking

When you select an object by touching it in the viewfinder, the camera tracks it for you.

This setting is only available in Normal capturing mode.

Exposure value

Determine the amount of light in the photo you want to take. A higher value indicates an increased

amount of light.

This setting is only available in Normal capturing mode.

HDR

Use the HDR (High Dynamic Range) setting to take a photo against strong back light or

in conditions where the contrast is sharp. HDR compensates for the loss of detail and

produces a picture that is representative of both dark and bright areas.

This setting is only available in Normal capturing mode.

White balance

The white balance setting adjusts the color balance according to the lighting conditions.

Auto

Adjusts the color balance automatically to suit the lighting conditions.

Incandescent

Adjusts the color balance for warm lighting conditions, such as under light bulbs.

Fluorescent

Adjusts the color balance for fluorescent lighting.

Daylight

Adjusts the color balance for sunny outdoor conditions.

Cloudy

Adjusts the color balance for a cloudy sky.

This setting is only available in Normal capturing mode.

ISO

You can reduce image blurring caused by dark conditions or moving subjects by

increasing the ISO sensitivity.

Auto

Sets the ISO sensitivity automatically.

100

Sets the ISO sensitivity to 100.

200

Sets the ISO sensitivity to 200.

400

Sets the ISO sensitivity to 400.

800

Sets the ISO sensitivity to 800.

1600