Operating Instructions - Operating Instructions
Table Of Contents
- Table of Contents
- Precaution
- On Safety
- On Installation
- Transportation of the Unit
- Connecting to Other Devices
- Handling the Screen
- On High Brightness Display
- On Burn-in
- On a Long Period of Use
- On the Surface of the Unit
- On Long Periods of Continuous Use
- Handling and Maintenance of the Screen
- On Dew Condensation
- Notes on Security
- On Repacking
- Disposal of the Unit
- On the Software Updates
- On Fan Error
- Location and Function of Parts and Controls
- Preventing Falling of the Monitor (BVM-E251)
- Mounting the Unit in a Rack (BVM-E171)
- Attaching the Handle (BVM-E171)
- Connecting the Controller (BKM-17R)
- Connecting Multiple Units with the LAN
- Connecting the HDMI cable
- Connecting the Power Cord
- Initial settings
- Setting for the LAN to Connect Multiple Units
- Selecting the Monitor (Designation of the Monitor or Group ID Number)
- Using the Menu
- Protection of the Setting Values
- Adjustment Using the Menus
- Displaying the Monitor Status Page
- Upgrading the Monitor and Controller
- Extending the Monitor Function with the Optional License (BVM-E171 only)
- Connecting the SDI Signals
- Troubleshooting
- Specifications
- Dimensions
- Precaution
Adjustment Using the Menus
67
[Scan Mode Skip]
Sets the scan mode to be skipped when the Scan button
is pressed in the single mode connection.
[None]: No scan is skipped.
[Under Scan]: The under scan is skipped.
[Over Scan]: The over scan is skipped.
[Screen Saver]
Sets the screen saver function.
[On]: When a still image is displayed on the screen for
10 minutes or more, the brightness of the screen is
automatically reduced to prevent burn-in of the
screen. The brightness returns to normal if you input a
moving image or operate the controller.
Approximately one minute before the screen saver is
activated, the STATUS indicator starts flashing
rapidly. Then, the STATUS indicator flashes slowly in
yellow (in the SDR display)/blue (in the HDR display)
when the screen saver is activated.
[Off]: Disables the screen saver function.
Note
The screen saver function is automatically set to [On]
during manual adjustment of the color temperature,
contrast, brightness, chroma, and phase, regardless of
the setting of this item.
[License Management] (BVM-E171 only)
Activates the optional license to extend the monitor
function.
For details on extending the monitor function, see
“Extending the Monitor Function with the Optional
License (BVM-E171 only)” on page 80.
[Monitor Upgrade]
Upgrades the monitor.
When the item is selected, the screen for inputting the
password is displayed.
After the 4-digit password is entered, the current
versions of [Software Version], [Kernel Version], [FPGA
Version] are displayed.
For the password, see [Password] (page 66) of the [System
Configuration] menu.
For details on upgrading the monitor, see “Upgrading the
Monitor and Controller” on page 77.
[Maintenance]
The menu for the Sony service representative is
displayed.
[File Management] Menu
The system data is saved, copied, and deleted.
When [File Management] is selected, the following
menu is displayed.
Note
Use the BKM-16R with software version 1.6 or higher or
BKM-17R to use the File Management function.
[Save To]
Saves the data in the USB memory stick, etc.
Note
Use the USB memory stick, etc. after formatting.
Submenu Setting
[Year] Sets the year.
[Month] Sets the month.
[Day] Sets the day.
[Hour] Sets the hour (in 24-hour display).
[Minute] Sets the minute.
[Cancel] Cancels the setting.
[Confirm] Executes the setting. Second is set to 0.
Submenu Setting
[Unique Device ID] Displays the unique device ID.
[Activate] Activates the license.
[Activate License
List]
Displays the activated license and
enabled function.
Submenu Setting
[Software Upgrade] Upgrades the software for the monitor.
[Kernel Upgrade] Upgrades the kernel of the monitor.
[FPGA Upgrade] Upgrades the FPGA data of the
monitor.