Operating Instructions - Operating Instructions
Table Of Contents
- Table of Contents
- Precaution
- On Safety
- On Installation
- Transportation of the Unit
- Connecting to Other Devices
- Handling the Screen
- On High Brightness Display
- On Burn-in
- On a Long Period of Use
- On the Surface of the Unit
- On Long Periods of Continuous Use
- Handling and Maintenance of the Screen
- On Dew Condensation
- Notes on Security
- On Repacking
- Disposal of the Unit
- On the Software Updates
- On Fan Error
- Location and Function of Parts and Controls
- Preventing Falling of the Monitor (BVM-E251)
- Mounting the Unit in a Rack (BVM-E171)
- Attaching the Handle (BVM-E171)
- Connecting the Controller (BKM-17R)
- Connecting Multiple Units with the LAN
- Connecting the HDMI cable
- Connecting the Power Cord
- Initial settings
- Setting for the LAN to Connect Multiple Units
- Selecting the Monitor (Designation of the Monitor or Group ID Number)
- Using the Menu
- Protection of the Setting Values
- Adjustment Using the Menus
- Displaying the Monitor Status Page
- Upgrading the Monitor and Controller
- Extending the Monitor Function with the Optional License (BVM-E171 only)
- Connecting the SDI Signals
- Troubleshooting
- Specifications
- Dimensions
- Precaution
Adjustment Using the Menus
59
[Aspect Blanking-
Half ]
Sets whether or not to set the Aspect
Blanking (the blanking outside the area
of the aspect marker) to half blanking
([Off] or [On]).
Notes
The Aspect Blanking is not set to
half blanking in the following cases:
– When the input signal has no sync
signal
– When the internal signal is
displayed
– When the HDMI computer signal
is input
– When [H Delay]/[V Delay] is set
to [On]
– When [Side by Side], [Wipe],
[Butterfly], or [Blending] is set to
[On]
– When [Pixel Zoom] is set to on
The Aspect Blanking may be
displayed in an incorrect position
when [External Sync] is [On].
[Aspect Blanking-
Black]
Sets whether or not to set the blanking
level of the Aspect Blanking (the
blanking outside the area of the aspect
marker) to 0% black level ([Off] or
[On]).
Notes
The Aspect Blanking is not set to 0%
black level in the following cases:
– When the input signal has no sync
signal
– When the internal signal is
displayed
– When the HDMI computer signal
is input
– When [H Delay]/[V Delay] is set
to [On]
– When [Side by Side], [Wipe],
[Butterfly], or [Blending] is set to
[On]
– When [Pixel Zoom] is set to on
The Aspect Blanking may be
displayed in an incorrect position
when [External Sync] is [On].
[Side by Side] Sets whether or not to display in the
side by side display ([Off] or [On]).
Note
The side by side display is not set in the
following cases:
When the internal signal is displayed
When [Pixel Zoom] is set to on
Submenu Setting
[Wipe] Sets whether or not to display in the
wipe display ([Off] or [On]).
Note
The wipe display is not set in the
following cases:
When the internal signal is displayed
When [Pixel Zoom] is set to on
[Butterfly] Sets whether or not to display in the
butterfly display ([Off] or [On]).
Note
The butterfly display is not set in the
following cases:
When the internal signal is displayed
When [Pixel Zoom] is set to on
[Blending] Sets whether or not to display in the
blending display ([Off] or [On]).
Note
The blending display is not set in the
following cases:
When the internal signal is displayed
When [Pixel Zoom] is set to on
[Error Notify Clear] When the item is selected, the
notification of the gamut error
detection ([OSD Notification]) is
cleared.
Note
The [Error Notify Clear] is not selected
in the following cases:
When [Gamut Error Display] is set
to [Off] in the [Gamut Error
Display] menu of the [Function
Setting] menu.
When [OSD Notification Reset] is
set to [Auto] in the [Gamut Error
Display] menu of the [Function
Setting] menu.
[Audio Level Meter] Sets whether or not to display the audio
level meter ([Off] or [On]).
Note
When [Format] of the [Channel
Configuration] menu is set to
[Composite] or [HDMI], the audio level
meter cannot be displayed.
Submenu Setting