Operating Instructions - Operating Instructions
Table Of Contents
- Table of Contents
- Precaution
- On Safety
- On Installation
- Transportation of the Unit
- Connecting to Other Devices
- Handling the Screen
- On High Brightness Display
- On Burn-in
- On a Long Period of Use
- On the Surface of the Unit
- On Long Periods of Continuous Use
- Handling and Maintenance of the Screen
- On Dew Condensation
- Notes on Security
- On Repacking
- Disposal of the Unit
- On the Software Updates
- On Fan Error
- Location and Function of Parts and Controls
- Preventing Falling of the Monitor (BVM-E251)
- Mounting the Unit in a Rack (BVM-E171)
- Attaching the Handle (BVM-E171)
- Connecting the Controller (BKM-17R)
- Connecting Multiple Units with the LAN
- Connecting the HDMI cable
- Connecting the Power Cord
- Initial settings
- Setting for the LAN to Connect Multiple Units
- Selecting the Monitor (Designation of the Monitor or Group ID Number)
- Using the Menu
- Protection of the Setting Values
- Adjustment Using the Menus
- Displaying the Monitor Status Page
- Upgrading the Monitor and Controller
- Extending the Monitor Function with the Optional License (BVM-E171 only)
- Connecting the SDI Signals
- Troubleshooting
- Specifications
- Dimensions
- Precaution
Adjustment Using the Menus
48
To hide the characters on the monitor during
setting
Set the CHAR OFF button of the controller to on. As the
characters on the display are hidden, it becomes easy to
adjust the picture. To display the characters, set the
CHAR OFF button to off.
[Aspect Marker]
Sets the aspect marker display.
[Area Marker 1]
Sets the area marker 1.
Submenu Setting
[Aspect Marker] Sets whether or not to display the aspect
marker when the MARKER button is
pressed ([Off] or [On]).
[Aspect Mode] Sets the aspect ratio of the aspect
marker.
You can select from [16:9], [15:9],
[14:9], [13:9], [4:3], [2.39:1], [2.35:1],
[1.85:1], [1.66:1], [1.896:1], or
[Variable].
[Aspect] Sets the aspect ratio of the aspect
marker when [Variable] is selected in
[Aspect Mode].
Set to 1.00:1 to 3.00:1. (Default value:
[1.78]:1)
[Line] Sets whether or not to display the line of
the aspect marker ([Off] or [On]).
[Thickness] Sets the thickness of the aspect marker.
Set from [1dot] to [5dot]. (Default
value: [2dot])
[Color] Sets the color of the aspect marker.
You can select from [White] (white),
[Red] (red), [Green] (green), [Blue]
(blue), [Yellow] (yellow), [Cyan] (cyan),
or [Magenta] (magenta).
[Bright] Sets the luminance of the aspect marker.
You can select from [High] (bright) or
[Low] (dark).
[Blanking] Sets the blanking outside the area of the
aspect marker.
[Off]: Blanking is released.
[Black]: Blanking is applied.
[Half]: Half blanking is applied.
Submenu Setting
[Area Marker 1] Sets whether or not to display the area
marker 1 when the MARKER button is
pressed ([Off] or [On]).
[Aspect Mode] Sets the aspect ratio of the area marker
1.
You can select from [16:9], [15:9],
[14:9], [13:9], [4:3], [2.39:1], [2.35:1],
[1.85:1], [1.66:1], [1.896:1], or
[Variable].
Note
When [Variable(dot)] is selected in
[Area Size], the size of the area marker 1
is set in pixel unit of the input signal
and the [Aspect Mode] setting becomes
invalid.
[Aspect] Sets the aspect ratio of the area marker
1 when [Variable] is selected in [Aspect
Mode].
Set to 1.00:1 to 3.00:1. (Default value:
[1.78]:1)
[Area Size] Sets the size of the area marker 1.
You can select from [80%], [88%],
[90%], [93%], [Variable(%)], or
[Variable(dot)].
[Width] Sets the width of the area marker 1
when [Area Size] is set to [Variable(%)]
or [Variable(dot)].
When [Variable(%)] is selected
Set to 050 to 100 (%). (Default value:
[080])
When [Variable(dot)] is selected
Set to 0360 to 2048 (dot). (Default
value: [0512])
[Height] Sets the height of the area marker 1
when [Area Size] is set to [Variable(%)]
or [Variable(dot)].
When [Variable(%)] is selected
Set to 050 to 100 (%). (Default value:
[080])
When [Variable(dot)] is selected
Set to 0240 to 1080 (dot). (Default
value: [0384])
Submenu Setting