Operating Instructions - Operating Instructions
Table Of Contents
- Table of Contents
- Precaution
- On Safety
- On Installation
- Transportation of the Unit
- Connecting to Other Devices
- Handling the Screen
- On High Brightness Display
- On Burn-in
- On a Long Period of Use
- On the Surface of the Unit
- On Long Periods of Continuous Use
- Handling and Maintenance of the Screen
- On Dew Condensation
- Notes on Security
- On Repacking
- Disposal of the Unit
- On the Software Updates
- On Fan Error
- Location and Function of Parts and Controls
- Preventing Falling of the Monitor (BVM-E251)
- Mounting the Unit in a Rack (BVM-E171)
- Attaching the Handle (BVM-E171)
- Connecting the Controller (BKM-17R)
- Connecting Multiple Units with the LAN
- Connecting the HDMI cable
- Connecting the Power Cord
- Initial settings
- Setting for the LAN to Connect Multiple Units
- Selecting the Monitor (Designation of the Monitor or Group ID Number)
- Using the Menu
- Protection of the Setting Values
- Adjustment Using the Menus
- Displaying the Monitor Status Page
- Upgrading the Monitor and Controller
- Extending the Monitor Function with the Optional License (BVM-E171 only)
- Connecting the SDI Signals
- Troubleshooting
- Specifications
- Dimensions
- Precaution
Using the Menu
28
Capital letters (A B ....... Y Z)
Lower-case letters (a b ....... y z)
Numbers (0 1 ....... 8 9) Marks
Capital letters...
When you press the DOWN button or turn the
PHASE knob counterclockwise, the characters and
symbols appear in the reverse sequence described
above.
The usable symbols are limited depending on the
menu.“(space)” is not used as a first character of a
sentence.
4
Press the ENTER or Ent button.
The selected character is entered.
Display example
5
Repeat steps 3 and 4 until all the characters are
entered, then press the ENTER or Ent button.
The selected characters are confirmed and the
display returns to the menu of the upper level.
To correct the entered character
Press the Del button. The character on the left side of the
cursor is deleted.
Entering the Channel Number
When selecting a one-digit number, press the button of
the channel number.
When selecting a two-digit number, first press the 0
button, then press a two-digit channel number.
Channel numbers 91 to 97 assignment
The signal systems to which the internal signal is
displayed are assigned to channel numbers 91 to 97. The
internal signal of the last signal system is displayed.
091: PLUGE signal
092: 20% gray signal
093: 100% white signal
094: Five-step gray scale signal
095: Ramp signal
096: color-bar signal
097: 0% black signal
To cancel the internal signal, select one from the channel
numbers 1 to 30.
Note
You cannot select channel numbers 91 to 97 in the
following cases:
When the XYZ signal, or the computer signal of
HDMI is input
When [Side by Side] is set to [On]
When [Wipe] is set to [On]
When [Butterfly] is set to [On]
When [Blending] is set to [On]
When [Pixel Zoom] is set to on
Aborting Menu Operation
Press the MENU button. The menu of the upper level is
displayed.
When the MENU button is pressed in setting mode or
during adjustment, the menu returns to the previous
setting.
The menu disappears automatically if not operated for
about one minute.