Operating Instructions - Operating Instructions
Table Of Contents
- Table of Contents
- Precaution
- On Safety
- On Installation
- Transportation of the Unit
- Connecting to Other Devices
- Handling the Screen
- On High Brightness Display
- On Burn-in
- On a Long Period of Use
- On the Surface of the Unit
- On Long Periods of Continuous Use
- Handling and Maintenance of the Screen
- On Dew Condensation
- Notes on Security
- On Repacking
- Disposal of the Unit
- On the Software Updates
- On Fan Error
- Location and Function of Parts and Controls
- Preventing Falling of the Monitor (BVM-E251)
- Mounting the Unit in a Rack (BVM-E171)
- Attaching the Handle (BVM-E171)
- Connecting the Controller (BKM-17R)
- Connecting Multiple Units with the LAN
- Connecting the HDMI cable
- Connecting the Power Cord
- Initial settings
- Setting for the LAN to Connect Multiple Units
- Selecting the Monitor (Designation of the Monitor or Group ID Number)
- Using the Menu
- Protection of the Setting Values
- Adjustment Using the Menus
- Displaying the Monitor Status Page
- Upgrading the Monitor and Controller
- Extending the Monitor Function with the Optional License (BVM-E171 only)
- Connecting the SDI Signals
- Troubleshooting
- Specifications
- Dimensions
- Precaution
Using the Menu
26
Notes
The menu disappears automatically if not
operated for about one minute.
Menu items displayed in gray cannot be selected.
This menu is not displayed when [Pixel Zoom] is
set to on.
2
Using the UP or DOWN button or PHASE knob,
select the desired item. (Example: select the
[Channel Configuration] menu by pressing the
DOWN button.)
3
Press the ENTER or Ent button
Level 1 of the selected menu is displayed.
The current settings are displayed in place of the
marks on the illustrations of the menu screen.
4
Repeat steps 2 and 3 until the desired menu is
displayed.
For more information about setting and
adjustments, see below.
Display example
Choosing the setting value
The method for selecting the value is different due to the
menu item.
Selecting in setting mode
Selecting from the setting list
When selecting in setting mode
1
Using the UP or DOWN button or PHASE knob,
select the desired item and press the ENTER or Ent
button.
The cursor moves to the setting value and the
monitor enters in setting mode.
Indicates that the menu continues
onto next page.
Indicates that this item has
sub-list. You can go to the
lower level.
Chooses the setting value.
Indicates that the menu is continued
from previous page.
Enters numerical values.