Specifications

50
Using the BRC Series Cameras as a Second Camera for the Sony Video Conferencing Systems
11
Using the BRC Series Cameras as a Second Camera
for the Sony Video Conferencing Systems
Using the BRC Series Cameras as a Second
Camera for the PCS-XG100/PCS-XG77 Video
Conferencing Systems
You can connect the BRC-H900/BRC-H700/
BRC-Z700/BRC-Z330 to the PCS-XG100/PCS-XG77.
Connection example for a second camera
Connect the video output connector on the
BRC-H900/BRC-H700/BRC-Z700/BRC-Z330 to the
“DVI-I 1” on the Codec unit using conversion cable.
Select “DVI-I 1” in “Second Camera Input" of the
Camera setup menu.
To switch the picture shot by two cameras
When the camera input selection is available, the
instruction “F2: Switches to the first camera.” Or “F2:
Switches to the second camera.” is displayed at
the bottom of the monitor screen. Each press of
the F2 button on the Remote commander
changes the picture shot by each camera.
Note
PCS-XG80 and PCS-XG55 support BRC-H700/
BRC-Z700/BRC-Z330 as a second camera.
First camera
BRC-H900/BRC-H700/
BRC-Z700/BRC-Z330
PCS-XG100/PCS-XG77
to VISCA OUT
<Rear side>
<Rear side>
VISCA cable (not supplied)
Conversion cable (not supplied)
to Video
output
(YPbPr)
to DVI-I 1 IN
to CAMERA
to VIDEO OUT,
VISCA IN,
DC IN
to VISCA IN
LAN1-ALERT-LAN2 ONLINE
1080 60P
CAMERA
I
N
O
U
T
HDMI
DVI-I OUT
ISDN UNIT AUX CONTROL MAINTENANCE
REC OUT
LRLRLRLR
AUDIO OUTAUDIO 2 INAUDIO 1 IN
MIC(A1)
1(R) 2(R) 3(R) 4(L) 5(L)
2
6(L)
DVI-I 1 DVI-I 2(PC)
HDMI-2
HDMI-1
1