Specifications

29
Location and Function of Parts
2
Reset switch
If you press down this switch with a pointed tip
for about five seconds, the camera will reboot
and the IP control card BRBK-IP7Z will return to
the factory setting.
Factory settings for BRBK-IP7Z
•IPaddress:192.168.0.100
•Subnetmask:255.255.255.0
•Name:CAM1
3
SDI 1, 2 connectors (BNC type)
Supplies down-converted SD-SDI signals that
conform to the SMPTE259M serial digital
interface standards, or HD-SDI signals that
conform to the SMPTE292 serial digital interface
standards. Select HD-SDI or SD-SDI signals with
the
4
HD/SD select switch.
4
HD/SD select switch
The SD setting supplies SD-SDI signals and the
HD setting supplies HD-SDI signals.
Note
•SD-SDIandHD-SDIsignalscannotbesupplied
simultaneously.
 •SettheSD/HDselectswitchbeforeturningon
the camera.
 •Donotpushtheswitchforciblywithascrew-
driver, etc.