Network Router User Manual
Table Of Contents
- Cover
- Table of Contents
- Manual Structure
- 1. Installation
- 1-1. Checking ROM Version
- 1-2. Configuration of BKP-7933
- 1-3. Installation Procedure
- 1-4. Setting Switches on the IF-689 Board
- 1-5. Installation
- 1-6. Connection
- 1-7. Setting Up
- 1-7-1. Outline
- 1-7-2. Linking the RCP Assignment and VE Monitor Selection
- 1-7-3. Linking the MSU Camera Selection and the VE Monitor Selection
- 1-7-4. Switching the Video on the Preview Monitor with the RCP PREVIEW Switch
- 1-7-5. Executing RCP Assignment from Equipment Other Than MSU
- 1-7-6. Switching the MSU Camera Selection Externally
- 1-7-7. Changing the Camera Assignment Virtually
- 1-7-8. Using the Tally System
- 1-7-9. Displaying the Self-diagnostic Information on the Terminal
- 1-7-10. Returning the Setups of the MODIFICATION COMMAND to the Factory Default Values
- 1-7-11. Returning the Setups of the MAINTENANCE COMMAND to the Factory Default Values
- 1-7-12. Connecting 13 or More Cameras
- 1-8. Data Backup/Restore
- 1-9. Modification of RCP
- 1-10. Using the BKP-7933 in the HD System
- 1-11. Description on Internal Indicators

! WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
! WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
! AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.










