Blu-ray Disc™/DVD Home Theatre System GB Start here Quick start guide BDV-NF620 BDV-NF720 BDV-NF720 BDV-NF620
1 What’s in the box/Setting up the speakers BDV-NF720 2 Connecting your TV BDV-NF620 3 Connecting other devices Main unit Front speakers Subwoofer 4 5 The on-screen Easy Setup Playing a disc and using other functions
What’s in the box Speaker cords (2) Speaker stands (2) Screws (2) Screw covers (2) Stand Cord cover Screws for the stand (3) Remote R6 (size AA) batteries (2) FM wire antenna (aerial) or Dock for iPod/iPhone Video cord USB cable (TDM-iP30) 03
1 Start by positioning the speakers according to the labels on the rear panel.
You can install the main unit in a raised position by attaching the stand. Insert the pins of the stand in the holes on the bottom of the unit. Then, secure the stand with the screws.
1 06 Next, connect the speakers to the main unit. Refer to the supplied “Speaker Installation Guide” for assembling the speakers.
2 To enjoy high-quality video and audio, connect via a High Speed HDMI cable (not supplied). If your TV has no HDMI ARC jack, you also need a digital optical cord (not supplied) to enjoy TV sound through the system speakers.
3 To connect your set-top box, game console, or digital satellite receiver, simply connect with an HDMI cable . For FM radio, connect the supplied wire antenna (aerial) and extend it for the best reception. You can also connect your iPod or iPhone to the system and your TV via the supplied dock.
You can connect to the Internet and home network via a wireless LAN or LAN cable (not supplied). For BDV-NF720, built-in Wi-Fi is available. For BDV-NF620, if you use the optional USB Wireless LAN Adapter, Wi-Fi is available. Network settings can be found in the home menu (page 13). For further details, visit: http://support.sony-europe.
3 10 Now attach the cord cover, then connect the AC power cord (mains lead) to a wall outlet (mains).
4 Press / to turn the system on. “SETUP” appears in the front panel display. To ready the system for use, go through the on-screen Easy Initial Settings using the supplied remote. This should only take a few minutes. Once [Easy Initial Settings are complete.] appears on the screen, select [Finish] and the system is ready to use. If the setup screen is not displayed, select the correct AV input in your TV.
5 To play a disc, simply insert one into the disc slot with the labeled side facing the front. To eject it, press . The LINK/STANDBY indicator on the surround amplifier turns green. If playback does not start automatically, select in the [Video], [Music], or [Photo] category, and press .
To access more features, simply press HOME. Examples: Listen to the radio through the system’s speakers Preset radio stations Access Internet content Play your iPod or iPhone through the system’s speakers You can make network settings via this menu when the main unit is connected to a broadband router.
5 Presetting radio stations 1 Press FUNCTION repeatedly until “FM” appears in the front panel display. 2 Press and hold TUNING +/– until auto scanning starts. 3 Press OPTIONS. 4 Press / to select [Preset Memory], then press . 5 Press / to select the preset number you want, then press . 6 Repeat Steps 2 to 5 to store other stations. Selecting a preset station 1 Press FUNCTION repeatedly until “FM” appears in the front panel display.
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Also consult the Operating Instructions on the following website: http://support.sony-europe.com/ The power does not turn on. Check that the AC power cord (mains lead) is securely connected to the wall outlet (mains). The system does not work normally.
This quick start guide saves paper To save natural resources, Sony has drastically reduced paper by no longer including full printed manuals. However, full operating instructions, and more, can be found online: http://support.sony-europe.