Blu-ray Disc TM/ DVD Home Theatre System
CAUTION CLASS 3RVISIBLE ANDIqVISBLE LASER RASIATION wl q OPEN.AVOIO OIRgl EYEEXPOSO_. VORSICH1_Ass sRSici _SARI OH)UNSIOHrBA_ Do not install the appliance in a confined space, such as a bookcase built-in cabinet. lASERS RAH UNO NENN O_oFF _ T: U dMITT BAREN#UGENKONTAKT VERk$ ID_N. or To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. sYNI iG OG USYNIIG AS_RSTRA_IrG AFK ASS_ 3R VD ABHNG. UNOGAAT SEOIREKT[ P_ STYli, EN.
These following on the bottom and rear exterior amplifier. indications are located exterior of the main unit of the surround - Reorient or relocate the receiving antenna (aerial). - Increase the separation between the equipment and receiver.
packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational Frequency Tolerance: Important Safety 1) 2) 3) 4) 5) failure. -+20 ppm Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus water. near 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
Blu-ray Disc/DVD receiver (H BD-N9200W/H BD-N7200W/ HBD-N5200W) Surround amplifier (TA-SA7OOW R/TA-SA5OOWR) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Copyrights and Trademarks • This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive matrix surround decoder and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. ** For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc.
• The Bluetooth _ word mark and Iogos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. • This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S.
End User License Information Gracenote _' End User License Agreement This application or device software from Gracenote, contains Inc. of Emeryville, California ("Gracenote").
About These Operating Instructions °The instructions in these Operating Instructions describe the controls on the remote control. You can also use the controls on the main unit if they have the same or similar names as those on the remote control. oln this manual, "disc" is used as a general reference for BDs, DVDs, Super Audio CDs, or CDs unless otherwise specified by the text or illustrations. °The instructions in this manual are for BDV-N92OOW, BDV-N52OOW.
Table of Contents About These Operating Instructions ........................... Playback 9 Unpacking ................................ 12 Guide to Parts and Controls .... 14 Getting Started Step 1: Installing Speakers the ........................ 20 Step 2: Connecting the System ........................... 20 Connecting the speakers ... 21 Connecting the TV ............. 22 Connecting the other equipment ..................... 23 Connecting the antenna (aerial) ...........................
Other Operations Using the Control for HDMI Function for "BRAVIA" Sync .................................... Calibrating the Appropriate Speaker Settings Automatically .................... 45 46 Setting the Speakers ................ 47 Using the Sleep Timer ............. 48 Deactivating the Buttons on the Main Unit ..................... Additional Information Precautions .............................. 62 Notes about Discs ................... 65 Troubleshooting ...................... 65 Playable Discs .
Unpacking • • • • • • Operating Instructions Quick Setup Guide Speaker Installation Guide Remote control (1) R03 (size AAA) batteries (2) FM wire antenna (aerial) (1) • Center speaker • Subwoofer (1) (1) • Calibration mic (1)(BDV-N9200W/ BDV-N7200W only) • Speaker cords blue/green) (5, red/white/gray/ • Surround amplifier (1) • Bases (4) @ BDV-N9200W • Front speakers (2) 12us only (2), Surround speakers • Lower parts of the speakers (4) • Screws (large)(4) • Screws (small) (12) front
BDV-N7200W only • Front speakers (2), Surround speakers BDV-N5200W only • Front speakers (2) (2) • Surround speakers (2) • Center speaker (1) • Center speaker (1) • Subwoofer (1) • Subwoofer (1) • Speaker cords (5, red/white/gray/ blue/green) • Stands (for front and surround speakers) (4) • Screws (8) ? 13us
Guide to Parts and Controls For more Top [] and information, front refer to the pages in parentheses. panel I/_ (on/standby) Turns on the main standby mode. [] Disc lid (page 31) [] Top panel [] _ [] unit, or sets it to display (N-Mark) (page 36) Position the NFC-compatible device near this indication to activate the NFC function. 14us indicated LED indicator White: Lights up when the main unit is turned on.
[] Soft-touch buttons/indicators IDa* (play) [] [] [] _-- (open/close) (remote control sensor) m* (stop) I<1<1/IH_I (previous/next) About buttons/ indicators FUNCTION (page 28) Selects the playback source. The soft-touch button indicators flash each time you turn on the main unit, wait until the indicators stop flashing. The buttons only function when the indicators are lit.
Rear panel [] TV (DIGITAL IN OPTICAL) (pages 22, 23) [] [] jack [] ANTENNA (page 25) A.CAL MIC jack (BDV-N9200W/ BDV-N7200W only) (pages 28, 46) [] HDMI (OUT) jack (page [] HDMI (IN l/IN AUDIO [] LAN (100) terminal [] SPEAKERS jacks (page IN (L/R) jacks (pages 22, 23) Front panel [] I/_ [] LINK/STANDBY Rear (on/standby) indicator (page 27) You can check the status of wireless transmission between the main unit and surround 16us amplifier.
[] _-- (open/close) Opens or closes the disc lid. SPEAKERS TV*-+AUDIO Selects whether TV sound is output from the system's speakers or the TV's speaker(s). This function works only when you set [Control for HDMI] to [On] (page 59). TV I/_ (on/standby) (page 19) C2Z3 iT0P M_u Turns on the TV or sets it to standby mode. P0_up/ I/_ (on/standby) (page Turns on the system standby mode.
RETURN Returns (,/_/4/,) Moves item. 3D to the previous the highlight to a displayed _21](enter) Enters the selected MIRRORING Selects 35, 38) the "SCR M" function. buttons (page 31). (pages Enters menu. or exits the system's home Accesses the "Sony Entertainment Network TM" online service. NETFLIX the "NETFLIX" FUNCTION (page online 28) Selects the playback source. By setting [Input Skip Setting] (page 60), you can skip unused inputs when selecting a function.
[] MUTING Turns offthe VOL +/- sound temporarily. Adjusts the volume. TV VOL +l- Adjusts the TV volume. The TV's manufacturer's TViNPUTC32D Switches between sources. the TV's input source the TV and other input codes are registered to the buttons in the table above. If the setting is unsuccessful, the currently registered code is not changed. Press the corresponding button again.
Step 1: Installing the Speakers Install the speakers illustration below. by referring to the To assemble the speakers, refer to the supplied "Speaker Installation Guide". (_) ® @ @ (_) (_ Front left speaker (L) Front right speaker (R) Center speaker Surround left speaker (L) Surround right speaker (R) Subwoofer ®w Installing the surround in rear position (Speaker layout: speakers (Standard]) • Be sure to select the speakers layout setting (page 47) according to your speakers placement.
Connect the speaker cords to match the color of the SPEAKERS jacks of the main unit and surround amplifier. Be sure to insert the speaker connector until it clicks. To the main unit Red (Front right speaker (R)) Purple (Subwoofer) White (Front speaker To the surround Green left (Center (L)) speaker) amplifier Blue _ _Gray (Surround _ _ (Surround right left speaker _y( _/ speaker(B)) (L)) ._ ._..
Select one of the following TV. Video connection methods according to the input jacks on your connection HDMIcable 1) (nOt supplied) _2) _ HDMIIN(ARC) il4Ni or HDMIIN =======_ 1) High Speed HDMI cable 2)The Audio Return Channel (ARC) function enables the TV to output sound through the system with an HDMI connection, without performing the O or O connection below. To set the ARC function on this system, see [Audio Return Channel] (page 59).
To enjoy TV sound, select "TV" function connection O. for connection O or "AUDIO" function Connect the system, TV and other equipment as follows. You cannot enjoy the audio and video of the connected equipment through this system when the system is offor in standby mode. for on the TV TV i[ _..__ Vidreo out* r------m I I! 11 System _ "_ digital satellite receiver, etc.) I !_:=_ * This connection I _Q'" .... is unnecessary/for Select one of the following equipment.
High quality HDMI cable* (not supplied) Optical digital cord (not supplied) d3_ When you make connection to-1 O This connection can transmit both video and audio signals. • Video signals from the HDMI (IN 1/2) jacks are output to the HDMI (OUT) jack only when the "HDMII" or "HDMI2" function is selected. • To output an audio signal from the HDMI (IN 1/2)jacks to the HDMI (OUT)jack, you may need to change the audio output setting. For details, see [Audio Output] in [Audio Settings] (page 57).
Step 3: Preparing for Network Connection Rear of the main unit iiU To connect the system to your network, perform [Easy Network Settings]. For details, see "Step 5: Performing the Easy Setup" (page 27). Select the method based on your LAN (Local Area Network) environment. • If you use a wireless LAN The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings. • If you use a wired LAN Use a LAN cable to connect to the LAN (100) terminal on the main unit.
Before performing settings the network When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the network settings with the WPS button. If not, checkthe following information in advance, and record it in the space provided below. • The network name (SSID*) that identifies your network.
2 Press I/_ to turn on the system. D E2ZT/ Connect the AC power lead) of the surround cord (mains indicator turns green. If the LINK/STANDBY indicator not turn on, see "Wireless (page 68). does The LINK/STANDBY indicator shows wireless transmission status as follows. is turned on, wireless is activated and surround are being received. Turns orange The system is turned on, wireless transmission is activated with the Secure function, received.
3 Connect the calibration mic to the 7 A.CAL MIC jack on the rear panel. (BDV-N9200W/BDVN7200W only) Set up the calibration speakers 4 5 and the calibration Press I/_ mic. 8 Follow appears on the TV screen. The [Easy Initial Settings] for OSD language selection appears. _£asyl_t_alSet_ings lallg_a@etoSe dJsplaye_ Perform [Easy Initial Follow the on-screen <,/€/4!./,* the network using <,/€/4!./,* instructions settings and _.
"FM" FM radio (page "HDMII"/"H 44) DMI2" Equipment that is connected to the (IN 1) or HDMI(IN 2)jack (page 23) Press SOUND HDMI "'IV" Equipment (TV, etc.) that is connected TV (DIGITAL IN OPTICAL)jack, or a TV to the compatible with the Audio Return Channel function that is connected tothe HDMI (OUT) jack (pages 22, 23) [Screen mirroring-compatible device (pages • 2-channel source: The system 5.1 channel speaker output.
• When the speaker layout is set to [All Front] and you play back multi-channel source, select [ClearAudio+], [Movie], [Game] or [Night] to enjoy virtual surround sound. To select option the sound field [Sound 2 Press _/4 the the of presence and depth. Press MUSIC ARENA to select Arena : On]. press _. the sound field, pre-programmed [Music You can enjoy Live Music Concert filled with great excitement created by Sony unique Audio DSP technology.
To select the football Press FOOTBALL mode repeatedly while watching a football match broadcast. You can experience a feeling of presence in the stadium when watching the football match broadcast. • [Football: Narration On]: You can enjoy an immersive feeling of being in a football stadium through enhanced stadium cheers.
2 3 Prepare for BD-LIVE (BD-LIVE only). • Connect the system to a network (page 25). • Set [BD Internet Connection] to [Allow] (page 58). Insert a BD-ROM with BONUSVlEW/BD-LIVE, The operation method differs depending on the disc. Refer to the operating instructions of the disc. You can check the playback information, etc., by pressing DISPLAY. The displayed information differs depending on the disc type and system status.
Playing from a USB Device You can play video/music/photo on a connected USB device. Enjoying Music from a BLUETOOTHDevice "u files For playable types of files, see "Playable Types of Files" (page 72). Connect the USB device to the (USE) port. Refer to the operating instructions of the USB device before connecting. 2 Press menu appears on the TV Press _./_ to select H 4 Press 4,/,! to select _=_ [USB device], then and Profile 3 [Music], between digital devices.
Pairing is an operation where BLUETOOTH devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again. Place the BLUETOOTH within 1 meter main unit. 2 (3.3 feet) from Set the BLUETOOTH device the in Start playback on the BLUETOOTH device. Adjust the volume. Adjust the volume of the BLUETOOTH device first, if the volume level is still too low, adjust the volume level on the main unit. Press BLUETOOTH.
6 Adjust the volume, UsingScreenmirroring Adjust the volume of the BLUETOOTH device first, if the volume level is still too low, adjust the volume level on the main unit. • Once the main unit and the BLUETOOTH device are connected, you can control playback by pressing Imp, II, i, <_I/IH_ and I,_,_I/IHH. • You can connect to the system from a paired BLUETOOTH device in functions other than °BT", if you set [Bluetooth Power Setting] in ]External Input Settings] to [On] (page 61).
Connecting to a Remote Device by One-touch Function (NFC) What is "NFC"? NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags.
m The application may not be available in some countries/regions. 2 Start the "NFC Easy Connect" application on the remote device. Make sure that the application screen is displayed. 3 Hold the remote the N-Mark device on the main (page 36) until the vibrates. If the volume level is low, adjust the volume of the remote device first. If the volume level is still too low, adjust the volume level on the main unit.
1 2 Press MIRRORING. (page 36) until the Xperia smartphone vibrates. Vibration cue is provided when the Xperia smartphone is recognized by the main unit. The main unit establishes a connection smartphone. 3 Using "SongPal" Hold the Xperia smartphone near to the N-Mark on the main unit with Xperia Once connection is established, the Xperia smartphone screen appears on the TV screen. The Xperia smartphone is registered to the system. To exit mirroring Press HOME, RETURNor FUNCTION.
Prepare for Sony Entertainment Network. Connect (page 2 3 the system to a network 25). You can play video/music/photo files on other DLNA-certified equipment by connecting them to your home network. Press SEN. Press _,/_/4/,_ Internet on-demand press _. Video to select content the and a variety entertainment, streaming control of then panel This main unit can be used as a player and renderer.
To play remote files the system (Renderer) controller 3 by operating via a DLNA 4 You can operate the system with a DLNA-certified controller (a mobile phone, etc), when playing files stored on a DLNA server. / Renderer (This system) Server "_'t Press _,/,I, to select H J'j [Music]. [Video] or Press _/4 to select (_ [Video Search] or _ [Music Search]. The content information (such as title, cast, track, or artist), [Playback History[ and [Search History[ are displayed.
[3D Output Setting] Sets whether or not Available Options Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation. Common options [Sound Field] Changes the sound field setting [Cinema Studio 9.1ch] Turns on or off the Cinema mode (page [Music (page Studio 3D video from jack is output 9.1 channel 30). on or off the 30).
[Video Search] Displays information DVD-ROM based [Number on the BD-ROM/ on Gracenote technology. Entry] Inputs numbers. number. Use _./4,/,_/,_ to select the (A/V SYNC) When J_J [Music] only [Track Search] Searches the track number during music CD playback. [Add Slideshow Registers slideshow BGM] music files in the USB memory background music (BGM). [Music Search] Displays information on the audio based technology. on Gracenote as visualizer 49).
[b Stereo (Audio1)] and [b Stereo (Audio2)] do not appear if only one audio stream is recorded on the disc. Selecting the Audio Format, Multilingual Tracks, or Channel • CD • [,b Stereo]: sound. When the system is playing a BD/DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS) or multilingual tracks, you can change the audio format or language.
Listening to the Radio You can preset up to 20 stations. tuning, make sure to turn down volume to minimum. Press FUNCTION repeatedly until "FM" appears in the top panel Press FUNCTION repeatedly until "FM" appears in the top panel display. display. 2 Select the radio 2 station. Hold down auto Automatic tuning Hold down TUNING +/- Press TUNING 3 +/- repeatedly. Press VOL +/- repeatedly the volume.
System Audio Control You can enjoy the sound from TV or other equipment by a simple operation. Using the Control for HDMI Function for "BRAVIA" Sync This function is available on TVs with the "BRAVlA" Sync function. By connecting Sony equipment that is compatible with the Control for HDMI function via an HDMI cable, operation is simplified. To use the °BRAVlA" Sync function, be sure to turn on the system and all connected equipment after completed the HDMI connection.
Press _/4 according placement, Calibrating the Appropriate Speaker Settings Automatically [Auto to select setting to your speakers then press _. • ]Standard]: The surround speakers are installed in the rear position. • [All Front]: All speakers are installed in the front position. Calibration] (BDV-N9200W/BDV-N7200W The confirmation display Calibration] appears. only) D.C.A.C.
/U Press _/4 to select [OK] or [Cancel], then press E_. • The measurement is OK. Disconnect the calibration mic, then select [OK]. The result implemented. • The measurement Follow the message, is All settings are reset to default settings each time you change the speaker layout setting. 6 7 is not OK. then select 8 9 [OK] to retry. m You can change the unit of measurement (feet or meters) by pressing the color button (RED). Press _,/_ to select [OK] or [Cancel], then press _. Press _/4 press _.
3 Press _/4 • [Level] You can adjust the sound level of the speakers. You can set the parameters from -6.0 dB to +6.0 dB. Be sure to set [Test Tone] speaker, level. then 5 Press _. 6 Repeat 7 Press RETURN. the speaker type press _. the left or right press _/4 to adjust the Steps 3 to 5. The system returns to the previous display. 8 Press _/4 to select [Test Tone], then to select [Off], then press. 9 • [Relocation] then 4 Press _./._ to select to [On] for easy adjustment.
To check the remaining Press SLEEPonce. To change the remaining time time Press SLEEPrepeatedly. Deactivating the Buttons on the Main Unit (Child Lock) You can deactivate the buttons on the main unit (except for I/(_) for preventing misoperation, such as child mischief. Touch and hold • on the main unit for more than 5 seconds. "LOCKED" appears in the top panel display. The child lock function is activated and the buttons on the main unit are locked.
Browsing Websites Prepare for Internet Connect the system (page 25). 2 to a network You can check website information by pressing DISPLAY. The display information differs depending on the website and page status. Press HOME. The home screen. 3 4 browsing. menu appears Press _,/,_, to select Press _/4 Browser], To enter Select menu. [Network]. to select [Internet then press. The [Intemet appears. Some websites or not function.
[Break] Moves the input Various settings and operations are available by pressing OPTIONS. The available items differ depending the situation. [Browser the Internet Increases or disable JavaScript. • [Cookie Setup]: Sets whether [Window Displays List] a list of all current Allows you to return website by selecting [Bookmark Displays bookmark [URL entw] Allows you to enter keyboard to enable opened to a previous the window.
To cancel the Secure Link function For the main unit Select [Off] on Step 3 above. [Secure For the surround amplifier Hold down SECURE LINK on the rear of Link] You can specify the wireless connection to link the main unit to the surround amplifier using the Secure Link function. This function can help prevent interference if you use multiple wireless products or your neighbors use wireless products. 1 Select [Wireless Connection] (page 51).
[RF Channel] If you use multiple wireless systems, such as a wireless LAN (Local Area Network), the wireless signals may be unstable. In this case, the transmission may be improved by changing the following [RF Channel] setting. Select [Wireless Sound Connection] in [System 2 3 (page 51). Press _/4 then press. to Playback settings stored in the disc take priority over the Setup Display settings. Therefore, some of the functions may not be performed.
Icon '___I Explanation [System Settings] (page 5g) Makes the system-related settings. F,_ '_ [External Input Settings] (page 60) Sets the input skip setting for each external input. '_'_ (page[Network61) Settings] Makes detailed settings for Internet and network. 1-2-3 [Easy Network Settings] (page 61) Runs [Easy Network Settings[ to make the basic network settings. [Resetting] (page 62) Resets the system to the factory settings.
• [Screen Format] [Full]: Select this when connecting to a TV with a wide-mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV. [Normal]: Changes the picture size to fit the screen size with the original picture aspect ratio. • [DVD Aspect Ratio] [Letter Box]: Displays a wide picture with black bands on the top and bottom. • [Output Video Resolution] [Auto]: Outputs video signal according to the resolution of the TV or connected equipment.
• [4K Output] [Auto1]: Outputs 2K (1920 x 1080) video signals during video playback and 4K video signals during photo play when connecting to a Sony 4K-compatible equipment. Outputs 4K video signals during playback of 24p video contents in BD/DVD ROMs or photo play when connecting to a non-Sony 4K-compatible equipment. This setting does not work for 3D video image playback.
[Off]: No compression of dynamic range. • [Attenuation settings - AUDIO] Distortion may occur when you listen to an equipment connected to the AUDIO IN (L/R)jacks. You can prevent distortion by attenuating the input level on the main unit. [On]: Attenuates the input level. The output level will decrease at this setting. [Off]: Normal input level. • [Audio Output] You can select the output where the audio [Speaker]: Outputs from the system's [Speaker + HDMI]: signal method is output.
[BD/DVD Viewing Settings] [Parental Control Settings] • [BD/DVD Menu Language] You can select the default menu • [Password] Set or change the password for the Parental Control function. A password allows you to set a restriction on BD-ROM, DVD VIDEO, or Intemet video playback. If necessary, you can differentiate the restriction levels for BD-ROMs and DVD VIDEOs. language for BD-ROMs or DVD ROMs. When you select [Select Language Code], the display for entering the language code appears.
[Music Settings] • [Super Audio CD Playback Layer] [Super Audio CD]: Plays the Super Audio CD layer. [CD]: Plays the CD layer. • [Super Audio CD Playback Channel] [DSD 2ch]: Plays the 2-channel area. [DSD Multi]: Plays the multi-channel area. [System Settings] • [OSD Language] You can select for the system the language you want on-screen display. • [Closed Captions Settings] (USA model only) You can set the format of Closed Captions screen.
• [Quick Start Mode] [On]: Shortens the startup time from standby mode. You can operate the system quickly after turning it on. [Off]: The default setting. • [Power Save Drive] [On]: Reduces power consumption when volume level is low. [Off]: Normal status. The system can output sound volume. • [Auto Display] [On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc. [Off]: Displays information only when you press DISPLAY.
You can enjoy high quality sound if the AAC is enabled. In case you cannot listen to AAC sound from your device, select [Off]. • [Bluetooth Power Setting] [On]: The BLUETOOTH power is turned on. A paired BLUETOOTH device can always connect to the main unit. [Off]: The BLUETOOTH power is only turned on when "BT" function is selected. In some applications, you may not be able to make the connection directly from the BLUETOOTH device even though you have set [Bluetooth Power Setting] to [On].
[Resetting] • [Reset to Factory Default Settings] You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset. • [Initialize Personal Information] You can erase your personal information stored in the system. If you dispose, transfer or resell this system, please delete all Personal Information for security purposes. Please take the appropriate measures such as logging out after using a network service.
• Keep the system and discs away from components with strong magnets, such as microwave ovens, or large loudspeakers. • Do not place heavy objects on the system. • Do not place metal objects in front of the front panel. It may limit reception of radio waves. • Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment.
On BLUETOOTH communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication shorter under conditions.
Notes about Discs Troubleshooting On handling If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. In the event of a problem with the wireless sound function, have a Sony dealer check the entire system (main unit and surround amplifier). discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface.
z_ appears without any messages the entire TV screen. --* [A new software version is available. Please go to the "Setup" section of the menu and select "Software Update" to perform the update.] appears on the TV screen. --* See [Software Update[ (page 54) to update the system to a latest software version. "PRTECT", "PUSH" and "POWER" appear alternately in the top panel display. --* Press I/_ to turn offthe system, and check the following items after "STBY" disappears.
The dark area of the picture is too dark/ the bright area is too bright or unnatural. --* Set [Picture Quality Mode] to [Auto] (default) (page 41). If the picture output from your system goes through your output. --* HDMI(IN 1) and HDMI(IN 2) does not accept an audio format that contains copy protection. Connect the analog audio output of the equipment to the AUDIO IN (L/R) jacks of the main unit.
The sound outputs from the center speaker only. -_ Depending on the disc, the sound may output from the center speaker only. • Flashes speaker connections -_ settings (pages 21, 47). Check the sound field setting -_ (page 29). Depending on the source, of the surround less noticeable. -_ Set [Sound (page 29). Distortion connected --* Field] speakers (_) Is anything ventilation surround and settings the effect may be of a amplifier? turns green transmission is no sound speakers.
Radio -_ -_ stations cannot be tuned Playback does not start from resume point where you last playing. -_ The resume point may be from memory depending disc when in. Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial)if necessary. The signal strength of the stations too weak (when tuning in with automatic tuning). Use manual tuning. • • • • is for the soundtrack/ subtitle or angles cannot be changed.
The picture/sound programs display especially during scenes. -_ -_ -_ is poor/certain with a loss of detail, fast-motion or dark Picture/sound quality may be poor depending on Internet content providers. Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standarddefinition video and 10 Mbps for high-definition video. Not all videos contain sound. The picture is small.
--* The wireless LAN connection may be unstable depending on the usage environment, especially while using the BLUETOOTH function of the system. In this case, adjust the usage environment. --* --* --* --* The wireless router you want is not shown in the wireless network list. --* Press RETURN to return to the previous screen, and try [Wireless Setup(built-in)] again.
3)A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device. 4)The system cannot play DVD disc that is recorded in AVCREC or HD Rec format. Discs that cannot • • • • • • • • • • on code Your system has a region code printed on the bottom of the main unit and will only play a BD-ROM/DVD VIDEO (playback only) labeled with identical region codes or _. Playable Types of Files Video MPEG-1Video .
Music MP3 (MPEGq Layer III) .11 AAC/HE-AAC WMA9 Audio .1.11 Standard .I LPCM .11 Digital .m4a, .mac .6 .wma .wav FLAC .6 Dolby .mp3 .flac, .6.11 .fla .ac3 DSF .6 .dsf DSDIFF .6q2 .dff AIFF _6 .aiff, ALAC .6 .m4a .aif Photo JPEG .jpeg, .jpg, .jpe PNG .png .9 GIF .gif .9 MPO .mpo .6.I° "1 The system may not play this file format on a DLNA server. *2 The system can only play standard definition video on a DLNA server.
Supported Audio Formats Audio formats are as follows. supported Format "BD/DVD.... bythis Specifications Amplifier system Function HDMI1.... TV" "HDMI2" (DIGITALIN) O Section USA model only: AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 6 ohms loads, both channels driven, from 180 Hz - 20,000 Hz; rated 70 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
USB Section (USB) port: Type A (For connecting USB memo_% memory card reader, digital still camera, and digital video camera) LAN Section LAN (100) terminal IOOBASE-TX Terminal Wireless LAN Section Blu-ray Disc/DVD receiver (HBD-N9200W/HBDN7200W/ HBD-N5200W) Standards Compliance IEEE 802.11 a/b/g/n Frequency band 2.4 GHz, 5 GHz BLUETOOTH Section Communication system BLUETOOTH Specification version 3.0 Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx.
Center (SS-CTB125) BDV- N9200W/BDV- for N7200W Dimensions (w/h/d) (approx.) 365 mm x 73 mm x 77 mm (14 3/8 in x 2 7/8 in x 31/8 in) Mass (approx.) 1.1 kg (2 Ib 7 oz) Center (SS-CTB127) for BDV-N5200W Dimensions (w/h/d) (approx.) 240 mm x 90 mm x 85 mm (9 1/2 in x 3 5/8 in x 3 3/8 in) Mass (approx.) 0.58 kg (1 Ib 5 oz) (with speaker cord) for Dimensions (w/h/d) (approx.) 225 mm x365 mm x 345 mm (8 7/8 in x 14 3/8 in x 13 5/8 in) Mass (approx.) 5.
Standby power consumption 0.5 W (standby mode) 0.3 W (turned off) Dimensions (w/h/d) (approx.) 200 mm × 64 mm x 211.5 mm (7 7/8 in x 2 5/8 in x 8 3/8 in) Mass (approx.) 1.3 kg (2 Ib 14 oz) Design and specifications change without notice. are subject to Language Code List The language ISO 639:1988 spellings conform (E/F) standard.
Code 1157 Language Persian Code 1516 Language Swedish 1428 1436 1417 1463 1481 1483 1489 1507 1501 1495 1186 Polish Portuguese Punjabi Quechua RhaetoRomance Romanian Russian Samoan Sangho Sanskrit Scots Gaelic 1532 1527 1521 1540 1525 1528 1067 1529 1535 1539 1538 1531 Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen 1512 Serbian 1543 Twi 1502 Serbo- 1557 Ukrainian Croatian 1564 Urdu 1514 Sesotho 1572 Uzbek 1534 Setswana 1581 Vietnamese 1508 Sho
Index C Numerics 3D 32 CD 71 3D Output Setting Child Lock 49 Cinema Conversion 54 A A/V SYNC 42 Attenuation settings Audio DRC 56 - AUDIO 57 D Audio Language 58 Audio Output 57 Audio Return Channel 59 Audio Auto Auto Auto Settings 56 Calibration 46, 57 Display 60 Renderer Access Permission B BD BD BD BD Audio MIX Setting 56 Hybrid Disc Playback Layer 58 Internet Connection 58 Parental Control 58 BD/DVD Menu Language 58 BD/DVD Viewing Settings 58 BD-LIVE 31 BD-ROM 24p Output 55 BLUETOOTH 33 Blue
I R Initialize Personal Information 62 Input Skip Setting 60 Internet content 38 Internet Internet Internet Settings 61 Video Parental Control 58 Video Unrated 58 Code List 77 Multiplex broadcast Music Settings 59 S SBM 56 Screen Format 55 sound 43 Screen mirroring 35, 37 Screen Saver 60 N Network Network NFC 36 Remote Start 61 Renderer Access Control 61 Reset to Factory Default Settings 62 Resetting 62 L Language Rear panel 16 Region code 72 Registered Remote Devices 61 Remote control 17 Co
V Visualizer 49 W WEP 26 Wireless Sound Connection 59 WPA2-PSK (AES) 26 WPA2-PSK (TKIP) 26 WPA-PSK (AES) 26 WPA-PSK (TKIP) 26 m, O m 3 81us
The software any available of this system may be updated in the future. updates, please visit the following URL. To find out details on http://www.sony.com/blurayhtsupport/ SUPER gracenote ,3'L,_TM AUDrO Java B/_-r_y_isc http://www.sony.
