D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\010COV.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\020REG.fm masterpage: Left WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\020REG.fm On watching 3D video images Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images. Sony recommends that all viewers take regular breaks while watching 3D video images. The length and frequency of necessary breaks will vary from person to person. You must decide what works best.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\020REG.fm • This system incorporates High-Definition Multimedia Interface (HDMITM) technology. The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • Java is a trademark of Oracle and/or its affiliates. • “DVD logo” is a trademark of DVD Format/ Logo Licensing Corporation.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\020REG.fm • This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\020REG.fm You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\010COVTOC.fm masterpage: Right Table of Contents About These Operating Instructions .... 6 Unpacking ............................................ 9 Guide to Parts and Controls ............... 12 Getting Started Step 1: Installing the Speakers .............................. 18 Step 2: Connecting the System ................................. 19 Connecting the speakers ....... Connecting the TV ..................
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\010COVTOC.fm masterpage: Left Settings and Adjustments Using the Setup Display ..................... 55 [Remote Control Setting Guide] ........ 56 [Network Update] .............................. 56 [Screen Settings] ................................ 56 [Audio Settings] ................................. 58 [BD/DVD Viewing Settings] ............. 60 [Parental Control Settings] ................. 60 [Music Settings] .......................
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.fm masterpage: Left Guide to Parts and Controls For more information, refer to the pages indicated in parentheses. Main unit Top and front panel 2 3 4 5 6 1 0 9 A "/1 (on/standby) Turns on the main unit, or sets it to standby mode. B Disc lid (page 31) C LED indicator White: Lights up when the main unit is turned on.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.fm masterpage: Right Note During the demonstration, the volume level may be higher than the volume level you have set. G (USB) port (page 33) Place your fingernail in the slot to open the cover. H ./> (previous/next) I (remote control sensor) J Z (open/close) About soft-touch buttons/ indicators These buttons function when the soft-touch button indicators are lit.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.fm masterpage: Left Indicators in the top panel display A Lights up when stereo sound is received. (Radio only) B Lights up when repeat play is activated. C Lights up when the system is playing via the PARTY STREAMING function. D Lights up when muting is on.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.fm masterpage: Right Rear panel 1 9 8 7 6 2 3 54 A A.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.fm masterpage: Left The system automatically returns to standby mode Remote control The following buttons description is only for the system operation. See “Controlling Your TV or Other Equipment with the Supplied Remote Control” (page 50) for the buttons to operate the connected equipment. 1 2 3 4 5 6 7 8 • Number 5, AUDIO, N, and CH + buttons have a tactile dot.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\030UNP.fm D Color buttons Short cut keys for selecting items on some BD menus (can also be used for Java interactive operations on BDs). E TOP MENU Opens or closes the BD’s or DVD’s Top Menu. POP UP/MENU Opens or closes the BD-ROM’s Popup Menu, or the DVD’s menu. OPTIONS (pages 30, 41, 53) Displays the options menu on the TV screen or in the top panel display. (The location differs depending on the selected function.
Getting Started D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm x STOP Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder. Stops the built-in sound demonstration. Radio operation buttons See “Tuner” (page 44). TUNING +/– PRESET +/– H MUTING Turns off the sound temporarily. VOL +/– Adjusts the volume. SLEEP (page 49) Sets the sleep timer.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm Note Tip Connecting the speakers Connect the speaker cords to match the color of the SPEAKERS jacks of the main unit and surround amplifier. When connecting to the main unit and surround amplifier, insert the connector until it clicks.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm masterpage: Right Connecting the TV C A B Video connection A HDMI cable1) (not supplied) 2) or 1) 2) High Speed HDMI cable If the HDMI IN jack of your TV is compatible with the ARC (Audio Return Channel) function, digital audio signal can be output from the TV via an HDMI cable connection. For setting the ARC function, see [Audio Return Channel] (page 61).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm masterpage: Left Getting Started Connecting the other equipment (Set-top box, etc.) Connect the system, TV and other equipment as follows. TV Video out* Equipment (Set-top box, VCR, PlayStation®, or digital satellite receiver, etc.) A System B, C Signal flow : Video signal : Audio signal * This connection is unnecessary for connection A (HDMI connection).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm A masterpage: Right High quality Getting Started HDMI cable* (not supplied) HDMI OUT * High Speed HDMI cable B Optical digital cord (not supplied) DIGITAL OUT OPTICAL C Audio cable (not supplied) L AUDIO OUTPUT R Standard quality When you make connection A This connection can transmit both video and audio signals.
Getting Started D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm Connecting the antenna (aerial) masterpage: Left Step 3: Preparing for Network Connection Rear of the main unit Tip To connect the system to your network, perform [Easy Network Settings]. For details, see “Step 5: Performing the Easy Setup” (page 28). Select the method based on your LAN (Local Area Network) environment.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm Before performing the network settings • If security is set on your wireless network, the security key (WEP key, WPA key)**. * SSID (Service Set Identifier) is a name that identifies a particular wireless network. ** You need to check the settings of your wireless LAN router to get the information about SSID and security key. For details: – visit the following website: http://www.sony.
Getting Started D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm 3 Step 4: Setting up the Wireless System The main unit transmits sound to the surround amplifier that is connected to the surround speakers. To activate wireless transmission, perform the following Steps. 4 masterpage: Left Connect the AC power cord (mains lead) of the main unit. Before connecting the AC power cord, make sure all connections in “Step 2: Connecting the System” (page 19) are secure.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm masterpage: Right To specify the wireless connection The LINK/STANDBY indicator shows wireless transmission status, as follows. If you use multiple wireless products or your neighbors use wireless products, interference may occur. To prevent this, you can specify the wireless connection to link the main unit to the surround amplifier (Secure Link function).
Getting Started D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm 5 Step 5: Performing the Easy Setup Before performing Step 5 masterpage: Left Switch the input selector on your TV so that the signal from the system appears on the TV screen. The [Easy Initial Settings] for OSD language selection appears. Follow the Steps below to make the basic adjustments and network settings for the system. Displayed items vary depending on the area.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm masterpage: Right To recall the [Easy Network Settings] display Function and playback source 1 Press HOME. Equipment (TV, etc.) that is connected to the TV (DIGITAL IN OPTICAL) jack, or a TV compatible with the Audio Return Channel function that is connected to the HDMI (OUT) jack (page 21) 2 Press B/b to select [Setup].
Getting Started D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\040GET.fm Tip Selecting the sound mode Press SOUND MODE repeatedly during playback until the mode you want appears in the top panel display or on the TV screen. Auto The system automatically selects [Movie] or [Music] to produce the sound effect depending on the disc or sound stream. • 2-channel source: The system simulates surround sound from 2-channel sources and outputs sound from the 5.1 channel speakers.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm Selecting the football mode masterpage: Right Playback • [Football : Narration On]: You can enjoy an immersive feeling of being in a football stadium through enhanced stadium cheers. • [Football : Narration Off]: You can enjoy a more immersive feeling of being in a football stadium by minimizing the volume level of narration in addition to the enhancement of cheers. • [Football Off]: The football mode is turned off.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm Enjoying BONUSVIEW/ BD-LIVE Enjoying Blu-ray 3D Some BD-ROMs with “BD-LIVE Logo*” have bonus content and other data that can be downloaded for enjoyment. 2 3 You can enjoy Blu-ray 3D Discs with the 3D logo*. * 1 * 1 masterpage: Left Connect the USB device to the (USB) port (page 33). For local storage, use a 1 GB or larger USB memory. Prepare for BD-LIVE (BD-LIVE only). • Connect the system to a network (page 24).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm Displaying the playback information masterpage: Right Playing from a USB Device You can play video/music/photo files on a connected USB device. For playable types of files, see “Playable Types of Files” (page 74).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm masterpage: Left Note Enjoying music from a Bluetooth device About the Bluetooth wireless technology Bluetooth wireless technology is a shortrange wireless technology that enables wireless data communication between digital devices. Bluetooth wireless technology operates within a range of about 10 meters (33 feet).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm 5 3 4 Note You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one. 6 7 Start playback on the Bluetooth device. Adjust the volume. Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the main unit. To cancel pairing operation Press HOME or FUNCTION.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm Two-dimensional code* for direct access Connecting to a smartphone by Onetouch listening function (NFC) * Use a two-dimensional code reader app. By holding an NFC-compatible smartphone near to the on the main unit, the main unit and smartphone proceed to complete pairing and the Bluetooth connection automatically. Compatible smartphones Smartphones with a built-in NFC function (OS: Android 2.3.3 – 4.0.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm masterpage: Right Note Tip Playing via a Network Enjoying Sony Entertainment Network (SEN) If pairing and the Bluetooth connection fail, do the following. – Relaunch “NFC Easy Connect” and move the smartphone slowly over the . – Remove the case from the smartphone if using a commercially available smartphone case.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm Video streaming control panel The control panel appears when a video file starts playing. The displayed items may differ depending on the Internet content provider. To display again, press DISPLAY. A Control display Press B/V/v/b or operations.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm To play files stored on a DLNA server via the system (DLNA Player) Server Player (This system) Playing the same music in different rooms (PARTY STREAMING) You can play the same music at the same time on all Sony equipment which are compatible with the PARTY STREAMING function and connected to your home network. Contents in [Music] and the “FM”, “BT” and “AUDIO” functions can be used with the PARTY STREAMING function.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm To use the system as the PARTY host 3 Select a track in [Music], a radio station in [Radio], [AUDIO] or [Bluetooth AUDIO] in [Input], press OPTIONS. Then select [Start PARTY] to start. To close, press OPTIONS, then select [Close PARTY]. 4 Note If content that is not compatible with the PARTY STREAMING function is played, the system closes PARTY automatically.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm masterpage: Right [Video] only Available Options [A/V SYNC] Adjusts the time gap between picture and sound (page 43). Playback Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation. [3D Output Setting] Sets whether or not to output 3D video automatically. Common options Note [Sound Mode] Changes the sound mode setting (page 30).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\050PLA.fm [Subtitle] [Photo] only Selects the subtitle language when multilingual subtitles are recorded on BD-ROMs/DVD VIDEOs. [Slideshow] [Angle] [Slideshow Speed] Switches the viewing angles when multiangles are recorded on BD-ROMs/DVD VIDEOs. [IP Content NR Pro] Adjusts the video quality for Internet content. [Video Search] Displays information on the BD-ROM/ DVD-ROM based on Gracenote technology.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\060SOU.fm Adjusting the delay between the picture and sound Sound Adjustment (A/V SYNC) When other than the “BT” or “TV” function is selected 2 3 Press OPTIONS. The option menu appears on the TV screen. Press V/v to select [A/V SYNC], then press . Press B/b to adjust the delay, then press . You can adjust from 0 ms to 300 ms in 25 ms increments. When the “TV” function is selected 1 2 3 4 Press OPTIONS. “AV.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\070TUN.fm masterpage: Left Note [ Stereo (Audio1)] and [ Stereo (Audio2)] do not appear if only one audio stream is recorded on the disc. x CD • [ Stereo]: The standard stereo sound. • [ 1/L]: The sound of the left channel (monaural). • [ 2/R]: The sound of the right channel (monaural). • [ L+R]: The sound of both the left and right channels output from each individual speaker.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\070TUN.fm To turn off the radio Selecting a preset station Press "/1. 1 Presetting radio stations You can preset up to 20 stations. Before tuning, make sure to turn down the volume to minimum. 2 3 4 5 6 Press FUNCTION repeatedly until “FM” appears in the top panel display. Hold down TUNING +/– until the auto scanning starts. Scanning stops when the system tunes in a station. Press OPTIONS.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm masterpage: Left System Audio Control You can enjoy the sound from TV or other equipment by a simple operation. Other Operations Using the Control for HDMI Function for “BRAVIA” Sync This function is available on TVs with the “BRAVIA” Sync function. By connecting Sony equipment that is compatible with the Control for HDMI function via an HDMI cable, operation is simplified.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm 6 Calibrating the Appropriate Speaker Settings Automatically [Auto Calibration] D.C.A.C. DX (Digital Cinema Auto Calibration DX) brings you the ideal sound experience by automatically adjusting the setting of the speakers’ distance, location, and acoustic. 1 2 3 4 5 8 Press . [Auto Calibration] starts. The system adjusts the speaker settings automatically. Be quiet during the measurement. Note [Setup].
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm 8 Tip You can change the unit of measurement (feet or meters) by pressing the color button (RED). Setting the Speakers [Speaker Settings] To obtain optimum surround sound, set the speakers’ distance from your listening position. Then use the test tone to adjust the balance of the speakers. 1 2 3 4 5 Press HOME. The home menu appears on the TV screen. Press B/b to select [Setup].
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm 8 Press V/v to select [Test Tone], then x [Relocation] You can correct the speaker position virtually to improve the surround effect. press Note [Off]: The test tone is not emitted from the speakers. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm masterpage: Left Controlling your equipment with the supplied remote control Deactivating the Buttons on the Main Unit 1 (Child Lock) Press TV or STB that matches the equipment you want to control. You can deactivate the buttons on the main unit (except for "/1) for preventing misoperation, such as child mischief. 2 Touch and hold x on the main unit for more than 5 seconds. “LOCKED” appears in the top panel display.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm Button 5 Remote’s mode STB m/M z z ./> z a N PLAY z z X PAUSE z z x STOP z z MUTING z z VOL +/– z z CH +/– z z SLEEP (INPUT) z z 6 7 8 Note • In TV or STB mode, if you press any of the buttons above, the TV or STB button lights up. (However, depending on the code setting, some buttons may not work, and the TV or STB button may not light up.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm masterpage: Left To set the default start page Saving Power in Standby Mode While the page you want to set is displayed, select [Set as start page] from the options menu. Check that you have made the following settings: – [Control for HDMI] in [HDMI Settings] is set to [Off] (page 61). – [Quick Start Mode] is set to [Off] (page 61). – [Remote Start] in [Network Settings] is set to [Off] (page 63).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm D SSL icon Appears when the linked URL is secured. masterpage: Right [Previous page] Moves to a previous displayed page. [Next page] E Signal strength indicator Appears when the system is connected to a wireless network. Moves to the previous displayed next page. F Progress bar/Loading icon Appears when the page is being read, or during file download/transfer. [Reload] [Cancel loading] Stops loading a page.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\080OTH.fm Further Settings for the Wireless System Activating wireless transmission between specific units [Secure Link] You can specify the wireless connection to link the main unit to the surround amplifier using the Secure Link function. This function can help prevent interference if you use multiple wireless products or your neighbors use wireless products. 1 2 3 4 5 6 7 8 Press HOME. The home menu appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm If wireless transmission is unstable Settings and Adjustments [RF Channel] If you use multiple wireless systems, such as a wireless LAN (Local Area Network) or Bluetooth, the wireless signals may be unstable. In this case, the transmission may be improved by changing the following [RF Channel] setting. 1 4 6 Note 1 [Setup]. Press HOME. The home menu appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm Icon Explanation masterpage: Left [Network Update] [Parental Control Settings] (page 60) Makes detailed settings for the Parental Control function. By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, refer to the following website: http://www.sony.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm x [TV Type] [16:9]: Select this when connecting to a wide-screen TV or a TV with a wide-mode function. [4:3]: Select this when connecting to a 4:3 screen TV without a wide-mode function. x [DVD Aspect Ratio] [Letter Box]: Displays a wide picture with black bands on the top and bottom. [Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm x [4K Output] [Auto1]: Outputs 2K (1920 × 1080) video signals during video playback and 4K video signals during photo play when connecting to a Sony 4K-compatible equipment. Outputs 4K video signals during playback of 24p video contents in BD/DVD ROMs or photo play when connecting to a nonSony 4K-compatible equipment. This setting does not work for 3D video image playback.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm x [Attenuate - AUDIO] Distortion may occur when you listen to an equipment connected to the AUDIO (AUDIO IN L/R) jacks. You can prevent distortion by attenuating the input level on the main unit. [On]: Attenuates the input level. The output level will decrease at this setting. [Off]: Normal input level. x [Audio Output] You can select the output method where the audio signal is output.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm masterpage: Left [BD/DVD Viewing Settings] [Parental Control Settings] x [BD/DVD Menu Language] You can select the default menu language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to “Language Code List” (page 79). x [Password] Set or change the password for the Parental Control function.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm masterpage: Right Note [Music Settings] When [Auto] is selected, only N button lights up during playback. x [Super Audio CD Playback Layer] [Super Audio CD]: Plays the Super Audio CD layer. [CD]: Plays the CD layer. x [Super Audio CD Playback Channel] [DSD 2ch]: Plays the 2-channel area. [DSD Multi]: Plays the multi-channel area. x [OSD Language] You can select the language you want for the system on-screen display.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm masterpage: Left x [Screen Saver] [On]: Turns on the screen saver function. [Off]: Off. [External Input Settings] x [Software Update Notification] [On]: Sets the system to inform you of latest software version information (page 56). [Off]: Off. The skip setting is a convenient feature that allows you to skip unused inputs when selecting a function.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\090SET.fm x [Network Connection Diagnostics] You can run the network diagnostic to check if the network connection has been made properly. masterpage: Right x [Remote Start] [On]: Allows turn on the system by a device linked via network when the system is in standby mode. [Off]: The system cannot be turned on by a device linked via network. x [Connection Server Settings] Sets whether or not to display the connected DLNA server.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm Additional Information Precautions On safety • Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further. • Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock. On power sources If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. On cleaning discs, disc/lens cleaners Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm • This main unit supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm masterpage: Right Messages Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. In the event of a problem with the wireless sound function, have a Sony dealer check the entire system (main unit and surround amplifier).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm appears without any messages on the entire TV screen. t Contact your nearest Sony dealer or local authorized Sony service facility. “NOT.USE” appears in the top panel display when you press SOUND MODE, FOOTBALL or MUSIC EQ. masterpage: Left The dark area of the picture is too dark/the bright area is too bright or unnatural. t Set [Picture Quality Mode] to [Auto] (default) (page 41). Picture noise appears.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm The Super Audio CD sound of an equipment that is connected to the HDMI (IN 1) or HDMI (IN 2) jack is not output. t HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains copy protection. Connect the analog audio output of the equipment to the AUDIO (AUDIO IN L/R) jacks of the main unit. There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm • Turns off. – Check that the AC power cord (mains lead) of the surround amplifier is connected securely. – Turn the surround amplifier on by pressing "/1 on the surround amplifier. • Flashes green quickly. – 1 Press "/1 on the surround amplifier. 2 Insert the wireless transceiver into the surround amplifier correctly. 3 Press "/1 on the surround amplifier. • Flashes red.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm File names are not displayed correctly. USB device t The system can only display ISO 8859-1 compliant character formats. Other character formats may be displayed differently. t Depending on the writing software used, the input characters may be displayed differently. The USB device is not recognized. A disc does not start playing from the beginning. t Resume play has been selected.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm masterpage: Left The system cannot connect to the network or the network connection is unstable. “BRAVIA” Sync ([Control for HDMI]) The [Control for HDMI] function does not work (“BRAVIA” Sync). t Check that [Control for HDMI] is set to [On] (page 61). t If you change the HDMI connection, turn the system off and on again.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm Bluetooth device Pairing cannot be done. t Move the Bluetooth device closer to the main unit. t Pairing may not be possible if other Bluetooth devices are present around the main unit. In this case, turn off the other Bluetooth devices. t Delete the system from your Bluetooth device and perform pairing again (page 34).
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm masterpage: Left • A disc recorded in a color system other than NTSC, such as PAL (This system conforms to the NTSC color system.) Playable Types of Files Notes on discs Video This product is designed to play back discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm Photo Photo Format Extension JPEG .jpeg, .jpg, .jpe PNG .png*9 GIF .gif*9 MPO .mpo*6*10 *1 • The system can support video bit rate up to 40 Mbps. • The system can support video resolution up to 1920 × 1080p. • Some USB devices may not work with this system. • The system can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD), Still Image Capture Devices (SICDs), and 101-key keyboards.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm masterpage: Left USB Section Note • The HDMI (IN 1) and HDMI (IN 2) jacks do not input sound in the case of an audio format that contains copy protections such as Super Audio CD or DVD-Audio. • For LPCM 2ch format, the supported sampling frequency of the digital signal is up to 96 kHz when using the “HDMI1” or “HDMI2” function, and 48 kHz when using the “TV” function. • For LPCM 5.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm FM Tuner Section Subwoofer (SS-WSB125) for BDV-N9100W/BDV-N8100W/ BDV-N7100W System PLL quartz-locked digital synthesizer Tuning range 87.5 MHz – 108.0 MHz (100 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Dimensions (w/h/d) (approx.) 280 mm × 440 mm × 280 mm (11 1/8 in × 17 3/8 in × 11 1/8 in) Mass (approx.) 8.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm masterpage: Left Wireless transceiver (EZW-RT50) Communication system Wireless sound Specification version 1.0 Frequency band 5.736 GHz – 5.814 GHz Modulation method DSSS Power requirements DC 3.3 V, 300 mA Dimensions (w/h/d) (approx.) 30 mm × 9 mm × 60 mm (1 3/16 in × 3/8 in × 2 3/8 in) Mass (approx.) 10 g (1/2 oz) Design and specifications are subject to change without notice. • Standby power consumption: 0.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.fm masterpage: Right Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\100ADD.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\010COVIX.fm masterpage: Right Index Numerics D 3D 32 3D Output Setting 56 D.C.A.C.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\010COVIX.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\010COVIX.
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 01)\4456334421_US (PX3)\110BCO.fm masterpage: Left The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony.
