4-288-248-11(1) Blu-ray Disc/DVD Home Theatre System Operating Instructions BDV-E980W/BDV-E780W
comply with FCC technical regulations. WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like.
Important Safety Instructions 1) 2) 3) 4) 5) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
For the wireless transceiver (EZWRT50) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment must not be colocated or operated in conjunction with any other antenna or transmitter.
• “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. • , “XMB,” and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc. • “PLAYSTATION” is a trademark of Sony Computer Entertainment Inc. • Music and video recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.
About These Operating Instructions • The instructions in these Operating Instructions describe the controls on the remote. You can also use the controls on the unit if they have the same or similar names as those on the remote. • In this manual, “disc” is used as a general reference for BDs, DVDs, Super Audio CDs, or CDs unless otherwise specified by the text or illustrations. • The instructions in this manual are for BDV-E980W and BDV-E780W. BDVE980W is the model used for illustration purposes.
Table of Contents About These Operating Instructions ....... 6 Unpacking ............................................... 8 Index to Parts and Controls...................10 Getting Started Step 1: Installing the System....... 16 Step 2: Connecting the System... 20 Step 3: Connecting to the Network.................................... 27 Step 4: Setting up the Wireless System ..................................... 28 Step 5: Performing the Easy Setup........................................
Unpacking BDV-E980W • Front speakers (2) • Speaker-bottom covers (4) • Calibration mic (1) • Bases (4) • Dock for iPod/iPhone (TDM-iP30) (1) • Lower parts of the front and surround speakers (4) • USB cable (1) • Surround speakers (2) • Surround amplifier (1) • Screws (silver) (4) • Wireless transceivers (2) • Screws (black) (12) • Center speaker (1) • FM wire antenna (aerial) (1) • Subwoofer (1) or • Video cord (1) • Speaker cords (5, red/white/ green/gray/blue) • Remote commander (remote) (1
BDV-E780W • Front speakers (2) • Surround speakers (2) • Speaker cords (3, green/ gray/blue) • FM wire antenna (aerial) (1) • Dock for iPod/iPhone (TDM-iP30) (1) • USB cable (1) or • Surround amplifier (1) • Video cord (1) • Center speaker (1) • Remote commander (remote) (1) • Wireless transceivers (2) • R6 (size AA) batteries (2) • • • • • Subwoofer (1) • Calibration mic (1) Operating Instructions Quick Setup Guide Speaker Installation Guide Software License Information • Easy Setup Disc (DVD)
Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel VOL A Front panel display B Soft-touch buttons/indicators Z (open/close) (page 34) Opens or closes the disc tray. C VOL FUNCTION (USB) port (page 35) Used for connecting a USB device. D Power indicator Lights up while the system is turned on. N (play) E Disc tray (page 34) Starts or re-starts playback (resume play). Plays a slideshow when a disc containing JPEG image files is inserted.
Front panel display About the indications in the front panel display A Displays the system’s playing status. F Lights up when muting is on. B Lights up when repeat play is activated. G Displays the system’s status, such as radio frequency, etc. C Lights up when stereo sound is received. (Radio only) H Lights up when outputting 720p/1080i/ 1080p video signals from the HDMI (OUT) jack or 720p/1080i video signals from the COMPONENT VIDEO OUT jacks.
Rear panel SPEAKERS FRONT R FRONT L COMPONENT VIDEO OUT SUBWOOFER CENTER Y PB OUT ARC DIGITAL IN COAXIAL SAT/ CABLE IN 1 EZW-RT50 L DIGITAL IN OPTICAL PR AUDIO IN ECM-AC2 IN 2 FM COAXIAL 75 R VIDEO OUT TV AUDIO A.
Surround amplifier Rear panel Front panel L R IMPEDANCE USE 3-16 SPEAKERS EZW-RT50 SECURE LINK LINK/STANDBY A "/1 (Power) C Wireless transceiver (EZW-RT50) slot Turns the surround amplifier on/off. B LINK/STANDBY indicator You can check the status of wireless transmission between the main unit and surround amplifier. Indicator Status Turns green. The system is turned on, wireless transmission is activated and surround signals are being received. Turns orange.
A Z (open/close) Remote control Opens or closes the disc tray. The buttons for system operation only are described below. See “Controlling Your TV or Other Components with the Supplied Remote” (page 51) for the buttons for operation of the connected components. SPEAKERS TVyAUDIO Selects whether TV sound is output from the system’s speakers or the TV’s speaker(s). This function works only when you set [Control for HDMI] to [On] (page 64).
E FUNCTION (pages 30, 45) G MUTING Selects the playback source. Turns off the sound temporarily. HOME (pages 29, 45, 48, 49, 53, 54, 55, 59) AUDIO (pages 43, 44) Enters or exits the system’s home menu. VOL +/– (page 45) SOUND MODE (page 43) Adjusts the volume. Selects the sound mode. DISPLAY (pages 34, 38, 53) F Playback operation buttons See “Playback” (page 34). ./> (previous/next) Skip to the previous/next chapter, track, or file.
Getting Started Getting Started Step 1: Installing the System How to position the system Install the system by referring to the illustration below. A B F C G D A Front speaker (L (left)) B Front speaker (R (right)) C Center speaker D Surround speaker (L (left)) E Surround speaker (R (right)) F Subwoofer G Unit H Surround amplifier E H • Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.
About the subwoofer’s speaker cord Bottom of the subwoofer When packing is opened: Speaker cord is connected. • To avoid short-circuiting the speakers, make sure that the speaker cord connection is not like the following examples. If there is a problem, correct it.
Getting Started When installing the subwoofer with the wide side facing forward Toward the listening position 1 Secure the speaker cord in the speaker cord holder to the right of the speaker terminal. Speaker cord holder to the right of the speaker terminal Speaker cord 2 Thread the speaker cord through the gap along the side of the subwoofer.
When installing the subwoofer with the narrow side facing forward Getting Started Toward the listening position 1 Secure the speaker cord in the speaker cord holder to the left of the speaker terminal. Speaker cord holder to the left of the speaker terminal Speaker cord 2 Thread the speaker cord through the gap along the side of the subwoofer.
Getting Started Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cords (mains leads) of the unit and surround amplifier to a wall outlet (mains) until all the other connections are made. To assemble the speakers, refer to the supplied “Speaker Installation Guide.” (BDV-E980W only) • When you connect another component with a volume control, turn down the volume of the other components to a level where sound is not distorted.
To connect speaker cords to the unit and surround amplifier White (Front left speaker (L)) Purple (Subwoofer) Red (Front right speaker (R)) Green (Center speaker) Gray (Surround right speaker (R)) Blue (Surround left speaker (L)) L SPEAKERS R IMPEDANCE USE 3-16 SPEAKERS FRONT R Rear panel of the unit FRONT L SUBWOOFER CENTER Rear panel of the surround amplifier 21US Getting Started Connect the speaker cords to match the color of the SPEAKERS jacks of the unit and surround amplifier.
Getting Started Connecting the TV Connect the system to your TV to display the image of the system on your TV, and listen to TV sound via the system’s speakers. Depending on the jacks and functions on your TV, select the connection method.
A HDMI cable connection About Audio Return Channel If your TV is compatible with the Audio Return Channel function, an HDMI cable connection also sends a digital audio signal from the TV. You do not need to make a separate audio connection for listening to TV sound. For setting the Audio Return Channel function, see [Audio Return Channel] (page 64).
Getting Started Connecting the other components When a component you wish to connect to the system has an HDMI (OUT) jack You can connect a component that has an HDMI (OUT) jack such as a set-top box/digital satellite receiver or PLAYSTATION®3, etc., with an HDMI cable. An HDMI cable connection can send both video and audio signals. By connecting the system and the component using an HDMI cable, you can enjoy high-quality digital picture and sound via the HDMI (IN 1) or HDMI (IN 2) jack.
When the component does not have an HDMI OUT jack TV Video out Component Audio out Signal flow System : Video signal : Audio signal If the component plays sound only, connect the audio output of the component to the system. Depending on the jacks on the component, select the connection method.
Getting Started Connecting the antenna (aerial) Rear panel of the unit FM COAXIAL 75 ANTENNA or FM wire antenna (aerial) (supplied) • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. • If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM antenna (aerial).
Step 3: Connecting to the Network Select the method based on your LAN (Local Area Network) environment. • If you use a wireless LAN The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings. • If you use other than a wireless LAN Connect to the network by making a LAN cable connection as follows.
Getting Started Step 4: Setting up the Wireless System The unit transmits sound to the surround amplifier that is connected to the surround speakers. To activate wireless transmission, perform the following Steps. 1 Insert the wireless transceiver into the unit. 4 Press "/1 to turn the system on. "/1 5 Connect the AC power cord (mains lead) of the surround amplifier.
Depending on the connection method (page 22), perform the following setting. • HDMI cable connection: Follow the instructions that are displayed on the TV screen. • Component video cable connection: Select the picture quality. The available settings are as follows, from lowest to highest picture quality: 480i*, 480p**, 720p, and 1080i. Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model.
Getting Started Step 6: Selecting the Source You can select the playback source. 1 2 3 4 5 6 7 8 9 0 FUNCTION Press FUNCTION repeatedly until the desired function appears in the front panel display. Each time you press FUNCTION, the function changes as follows.
Step 7: Enjoying Surround Sound 1 2 3 4 5 6 7 8 9 0 X/x/c, OPTIONS Selecting surround settings based on your listening preference The setting method differs depending on the function. When playing via the “BD/DVD”* or “FM” function 1 Press OPTIONS. The option menu appears on the TV screen. 2 3 Press X/x to select [Surround Setting], then press . Press X/x repeatedly until the surround setting you want appears on the TV screen. See the table below for surround sound setting descriptions.
5 Press OPTIONS. Getting Started The option menu in the front panel display turns off. • When the home menu is displayed on the TV screen, this setting can be changed by selecting the surround setting via [Surround Setting] in [Audio Settings] of [Setup] (page 62). About speaker output of each surround setting The table below describes the options when you connect all the speakers to the unit. The default setting is [A.F.D. Multi] (“A.F.D. MULTI”).
• You can also select the surround setting in [Surround Setting] of [Audio Settings] (page 62). • For functions other than “BD/DVD,” you can check whether [Dolby Pro Logic] (“PRO LOGIC”), [Dolby PL II Movie] (“PLII MOVIE”), or the DTS Neo:6 mode is activated by pressing DISPLAY repeatedly so that the stream information/decoding status appears in the front panel display. 33US Getting Started • When you select [A.F.D. Multi] (“A.F.D.
2 • Connect the system to a network (page 27). • Set [BD Internet Connection] to [Allow] (page 62). Playback Playing a Disc For playable discs, see “Playable Discs” (page 74). 1 2 3 Insert a BD-ROM with BONUSVIEW/ BD-LIVE. The operation method differs depending on the disc. Refer to the operating instructions of the disc. Switch the input selector on your TV so that the signal from the system appears on your TV screen. Press Z, and place a disc on the disc tray. Prepare for BD-LIVE (BD-LIVE only).
Displaying the play information Example: when playing a BD-ROM You can play video/music/photo files on the connected USB device. For playable types of files, see “Playable Types of Files” (page 75). 1 Playback You can check the playback information, etc., by pressing DISPLAY. The displayed information differs depending on the disc type and system status. Playing from a USB Device Connect the USB device to the (USB) port on the unit.
Enjoying an iPod/iPhone Front panel You can enjoy the music/video/photo and charge the battery of an iPod/iPhone via the system. Rear panel TV or VIDEO IN Compatible iPod/iPhone models The compatible iPod/iPhone models are as follows. Update your iPod/iPhone with the latest software before using with the system.
You can operate the iPod/iPhone using the buttons on the remote. For operation details of the iPod/iPhone, also refer to the operating instructions of the iPod/iPhone. To operate the iPod/iPhone using the remote You can operate the iPod/iPhone using the buttons on the remote. The following table shows an example of buttons that can be used. (Depending on the iPod/iPhone model, the operation may be different.) For [Video]/ [Music] Press Operation N Starts play. X Pauses play. x Stops play.
Playing via a Network Streaming BRAVIA Internet Video BRAVIA Internet Video serves as a gateway delivering selected Internet content and a variety of on-demand entertainment straight to your unit. • For customers in the U.S. and Canada: Some Internet content requires registration via a PC before it can be played. For further details, visit the following website: http://www.sony.com/blurayhtsupport/ 1 Prepare for BRAVIA Internet Video. Connect the system to a network (page 27).
To play files stored on a DLNA server via the system (DLNA Player) Server You can play the same music at the same time across all Sony components which are compatible with the PARTY STREAMING function and connected to your home network. Playback Select the DLNA server icon from [Video], [Music], or [Photo] in the home menu, then select the file that you want to play. Playing the same music in different rooms (PARTY STREAMING) There are two kinds of PARTY STREAMINGcompatible components.
• The sale and product lineup of products that are compatible with the PARTY STREAMING function differ depending on the area. Searching for video/music information You can acquire content information using Gracenote technology and search for related information. 1 2 Connect the system to a network (page 27). Insert a disc or connect a USB device with content about which you want to search. You can perform a video search from a BDROM or DVD-ROM, and a music search from a CD-DA (music CD) or USB device.
[Video] only [Music] only Details Items Details [A/V SYNC] Adjusts the gap between picture and sound. For details, see “Adjusting the delay between the picture and sound” (page 42). [Add Slideshow BGM] Registers music files in the USB memory as slideshow background music (BGM). [Music Search] Displays information on the audio CD (CD-DA) based on Gracenote technology. [Shuffle Setting] (iPod/iPhone only) Sets shuffle playback.
Adjusting the delay between the picture and sound (A/V SYNC) When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the function. • Depending on the input stream, A/V SYNC may not be effective. When playing video content via the “BD/DVD” function 1 Press OPTIONS. The option menu appears on the TV screen. 2 3 Press X/x to select [A/V SYNC], then press .
at low volume. It is useful for watching movies at night. Sound Adjustment Selecting the Effect to Suit the Source 1 2 3 4 5 6 7 8 9 0 SOUND MODE Press SOUND MODE repeatedly during playback until the desired mode appears in the front panel display. • “AUTO”: The system selects “MOVIE” or “MUSIC” automatically to produce the sound effect depending on the disc or sound stream. • “MOVIE”: The system provides the sound for movies. • “MUSIC”: The system provides the sound for music.
x BD/DVD VIDEO Depending on the BD/DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. See “Language Code List” (page 79) to confirm which language the code represents. When the same language is displayed two or more times, the BD/DVD VIDEO is recorded in multiple audio formats. Enjoying Multiplex Broadcast Sound (DUAL MONO) You can enjoy multiplex broadcast sound when the system receives or plays a Dolby Digital multiplex broadcast signal.
3 Tuner Adjust the volume by pressing VOL +/–. If an FM program is noisy Listening to the Radio You can enjoy radio sound with the system’s speakers. If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. 1 Press OPTIONS. The option menu appears on the TV screen. "/1 2 3 4 5 6 7 8 9 Number buttons 0 3 Press X/x to select [FM Mode], then press . Press X/x to select [Monaural]. Tuner 1 2 • [Stereo]: Stereo reception.
Selecting the preset station 1 Press FUNCTION repeatedly until “FM” appears in the front panel display. The last received station is tuned in. 2 Press PRESET +/– repeatedly to select the preset station. The preset number and frequency appear on the TV screen and front panel display. Each time you press the button, the system tunes in one preset station. • You can select the preset station number directly by pressing the number buttons.
Other Operations Using the Control for HDMI Function for “BRAVIA” Sync • Some functions can only be used if the connected TV is compatible, and require prior setting via the TV. Refer to the operating instructions of the TV. • To use the System Audio Control function, you need to make an audio connection between the system and TV (page 22).
• Make sure that the component is connected to the system via an HDMI cable, and the Control for HDMI function of the connected component is set to on. Calibrating the Appropriate Settings Automatically • Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained.
Setting the Speakers [Speaker Settings] To obtain the best possible surround sound, set connection of the speakers and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. 1 Press HOME.
[Surround Left/Right]* 0.0 dB: Set the surround speaker level. [Subwoofer] 0.0 dB: Set the subwoofer level. * This item appears when you set it to [Yes] in the [Connection] setting. Using the Sleep Timer x [Test Tone] You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes. The speakers will emit a test tone to adjust [Level]. Press SLEEP. [Off]: The test tone is not emitted from the speakers.
Controlling Your TV or Other Components with the Supplied Remote z z FAVORITES z z POP UP/MENU (LIST) a z C/X/x/c, z z RETURN z z HOME (MENU) z z OPTIONS (TOOLS) z z FUNCTION (PAGE –) a a SOUND MODE (PAGE +) a a ./> z a NETFLIX z a QRIOCITY z a m/M z z N z z X z z x z z Press the TV or STB operation mode button that matches the component you want to control.
Changing the preset code of the remote (Preset mode) 1 Clearing the preset code from the remote’s memory 1 Press HOME. The home menu appears on the TV screen. 2 3 4 5 6 7 Press C/c to select Press X/x to select [Preset Mode], then press . Press X/x to select the component type that you want to operate with the supplied remote, then press . Press X/x to select the device’s manufacturer, then press .
Browsing Websites You can connect to the Internet and enjoy websites like the Sony homepage using the system. 1 Internet Browser display You can check website information by pressing DISPLAY. The display information differs depending on the website and page status. Prepare for Internet browsing. Connect the system to a network (page 27). 2 Press HOME. The home menu appears on the TV screen. Press C/c to select [Network]. Press X/x to select [Internet Browser], then press .
Available options Various settings and operations are available by pressing OPTIONS. The available items differ depending on the situation. Items Details [Browser Setup] Displays the Internet Browser settings. • [Zoom]: Increases or decreases the size of the displayed contents. • [JavaScript Setup]: Sets whether to enable or disable JavaScript. • [Cookie Setup]: Sets whether or not to accept browser cookies. • [SSL Alarm Display]: Sets whether to enable or disable SSL.
5 6 7 Press X/x to select [Secure Link], then press . Press SECURE LINK on the rear of the surround amplifier. 5 6 Press X/x to select [RF Channel], then press . Press X/x to select the desired setting, then press . The surround amplifier is linked to the main unit and the LINK/STANDBY indicator turns orange. If the message [Cannot set Secure Link.] appears, follow the on-screen messages. The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s).
2 Press C/c to select [Setup]. When connecting to the LAN with a LAN cable Follow the Steps below for connecting to a LAN (Local Area Network). Auto setting 3 1 Press X/x to select [Network Settings], then press . 2 Press X/x to select [Wired Setup] on the [Internet Settings] display, then press . Press X/x to select [Auto], then press . The system performs the network setting automatically, and internet settings appear on the TV screen. 3 4 4 Press X/x to select [Internet Settings], then press .
3 Press X/x to select the network setting type, then press . 4 Press X/x to select the proxy server setting, then press . When connecting to the wireless LAN with the system’s built-in Wi-Fi or the USB Wireless LAN Adapter Follow the Steps below for connecting to a wireless LAN (Local Area Network). When your wireless router is compatible with the WPS function 1 2 3 4 The system starts checking the network connection. 7 Check that the message [Wi-Fi Protected Setup was successful.
3 Press X/x to select the wireless LAN name, then press . x When the selected wireless LAN is unsecured Setup of wireless LAN connectivity is finished. Next, enter the IP address settings by following the Steps of “Auto setting” or “Manual setting” in “When connecting to the LAN with a LAN cable” above. x When the selected wireless LAN is secured The display for entering a WEP or WPA key appears. Go to Step 5. x To specify the wireless LAN name Select [Manual Entry]. The input display appears.
Icon Settings and Adjustments Using the Setup Display Explanation [Screen Settings] (page 60) Makes the screen settings according to the type of connecting jacks. [Audio Settings] (page 61) You can make various adjustments of items such as picture and sound. Select (Setup) on the home menu when you need to change the settings of the system. The default settings are underlined. Makes the audio settings according to the type of connecting jacks.
[Network Update] [Screen Settings] x [3D Output Setting] [Auto]: Normally select this. [Off]: Select this to display all contents in 2D. • 3D video from the HDMI (IN 1) or HDMI (IN 2) jack is output regardless of this setting. You can update and improve the functions of the system. For information about update functions, refer to the following website: x [TV Screen Size Setting for 3D] Sets the screen size of your 3D compatible TV.
x [Cinema Conversion Mode] x [HDMI Deep Color Output] [Auto]: Normally select this. The unit automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method. [Video]: The conversion method suited for video-based material will always be selected regardless of the material. [Auto]: Normally select this. [16bit], [12bit], [10bit]: Outputs 16bit/12bit/ 10bit video signals when the connected TV is compatible with Deep Color.
x [Audio Output] You can select the output method where the audio signal is output. [Speaker]: Outputs multi-channel sound from the system’s speakers only. [Speaker + HDMI]: Outputs multi-channel sound from the system’s speakers and 2-channel linear PCM signals from the HDMI (OUT) jack. [HDMI]: Outputs sound from the HDMI (OUT) jack only. Sound format depends on the connected component.
[Parental Control Settings] x [Password] Set or change the password for the Parental Control function. A password allows you to set a restriction on BD-ROM, DVD VIDEO, or Internet video playback. If necessary, you can differentiate the restriction levels for BD-ROMs and DVD VIDEOs. x [Parental Control Area Code] You can make detailed settings for Super Audio CD playback. x [Super Audio CD Playback Layer] [Super Audio CD]: Plays the Super Audio CD layer. [CD]: Plays the CD layer.
x [HDMI Settings] x [Gracenote Settings] [Control for HDMI] [On]: On. You can operate mutually between components that are connected with an HDMI cable. [Off]: Off. [Auto]: Automatically downloads disc information when you stop playback of the disc. To download, the system must be connected to the network. [Manual]: Downloads disc information when [Video Search] or [Music Search] is selected.
x [Party Auto Start] [On]: Starts a PARTY or joins an existing PARTY at the request of a networked device compatible with the PARTY STREAMING function. [Off]: Off. x [Media Remote Device Registration] Registers your “Media remote” device. x [Registered Media Remote Devices] Displays a list of your registered “Media remote” devices. Re-runs the Easy Setup to make the basic settings. Follow the on-screen instructions.
Additional Information Precautions On safety • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the system, or place the system near water, such as near a bathtub or shower room. Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further. • Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock.
IMPORTANT NOTICE Caution: This system is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Projection televisions are especially susceptible to this. Notes about the Discs On handling discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the wireless sound function, have a Sony dealer check the entire system together (main unit and surround amplifier).
Picture Symptom Problems and solutions There is no picture. • Check the output method on your system (page 22). There is no picture when you make an HDMI cable connection. • The unit is connected to an input device that is not HDCP (High-bandwidth Digital Content Protection) compliant (“HDMI” on the front panel does not light up) (page 22). 3D images from the HDMI (IN 1) or HDMI (IN 2) jack do not appear on the TV screen. • Depending on the TV or video component, 3D images may not appear.
Sound Symptom Problems and solutions There is no sound. • The speaker cord is not connected securely. • Check the speaker settings (page 49). The Super Audio CD sound of a • HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains component that is connected to copy protection. Connect the analog audio output of the component to the the HDMI (IN 1) or HDMI (IN AUDIO (AUDIO IN L/R) jacks of the unit. 2) jack is not output.
Wireless sound Problems and solutions Wireless transmission is not activated or there is no sound from the surround speakers. Check the status of the LINK/STANDBY indicator on the surround amplifier. • Turns off. – Check that the AC power cord (mains lead) of the surround amplifier is connected securely. – Turn the surround amplifier on by pressing "/1 on the surround amplifier. • Flashes green quickly. – 1 Press "/1 on the surround amplifier.
Playback Symptom Problems and solutions The disc does not play. • The region code on the BD/DVD does not match the system. • Moisture has condensed inside the unit and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour. • The system cannot play a recorded disc that is not correctly finalized (page 74). File names are not displayed correctly. • The system can only display ISO 8859-1-compliant character formats.
“BRAVIA” Sync ([Control for HDMI]) Symptom Problems and solutions The [Control for HDMI] function does not work (“BRAVIA” Sync). • Check that [Control for HDMI] is set to [On] (page 64). • If you change the HDMI connection, turn the system off and on again. • If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 64). • Check the following and refer to the operating instructions supplied with the component.
Notes on discs Playable Discs Blu-ray Disc BD-ROM1) BD-R/BD-RE2) DVD3) DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD3) CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD 1)Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. Also, the audio output differs depending on the source, connected output jack, and selected audio settings. 2)BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.
Playable Types of Files Video1) File format Extensions MPEG-1 Video/PS2)5) MPEG-2 Video/PS, TS2)6) “.mpg,” “.mpeg,” “.m2ts,” “.mts” Xvid “.avi” MPEG4/AVC2)5) “.mkv,” “.mp4,” “.m4v,” “.m2ts,” “.mts” WMV92)5) “.wmv,” “.asf” AVCHD 3)5) Music Extensions MP3 (MPEG-1 Audio Layer III) “.mp3” AAC2)4)5) “.m4a” WMA9 Standard2)4) “.wma” LPCM “.wav” Photo1) File format Extensions JPEG “.jpg,” “.jpeg” GIF “.gif” PNG “.
Supported Audio Formats Audio formats supported by this system are as follows. Format LPCM 2ch Function LPCM 5.1ch LPCM 7.1ch Dolby Digital Dolby TrueHD, Dolby Digital Plus DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS96/24 DTS-HD High Resolution Audio DTS-HD Master Audio “BD/DVD” a a a a a a a a “HDMI1” “HDMI2” a – a – a – – – “SAT/CABLE” “TV” (DIGITAL IN) a – a – a – – – a: Supported format. –: Unsupported format.
USB Section Specifications (USB) port: Amplifier Section LAN Section LAN (100) terminal Wireless LAN Section Standards Compliance Frequency and Channel VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms System Speakers Front (SS-TSB107) for BDV-E780W Dimensions (approx.) Mass (approx.) 96 mm × 330 mm × 72 mm (3 7/8 in × 13 in × 2 7/8 in) (w/h/d) (wall-mounted part) 106 mm × 325 mm × 107 mm (4 1/4 in × 12 7/8 in × 4 1/4 in) (w/h/d) (whole speaker) 0.8 kg (1 lb 13 oz) (wallmounted part) 0.
Surround (SS-TSB106) for BDV-E780W Surround amplifier (TA-SA300WR) Dimensions (approx.) Amplifier Section U.S.models: AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) With 3 ohms loads, both channels driven, from 180 - 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milli watts to rated output.
Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard.
Index Numerics F Q 3D 34 3D Output Setting 60 FM Mode 45 Front panel 10 Front panel display 11 Quick Start Mode 64 A A/V SYNC 42 Attenuate - AUDIO 61 Audio 62 Audio DRC 61 Audio Output 62 Audio Return Channel 64 Audio Settings 61 Auto Calibration 48, 62 Auto Display 64 Auto Standby 64 B BD Audio MIX Setting 61 BD Hybrid Disc Playback Layer 62 BD Internet Connection 62 BD Parental Control 63 BD/DVD Menu 62 BD/DVD Viewing Settings 62 BD/DVD-ROM 1080/24p Output 61 BD-LIVE 34 BONUSVIEW 34 BRAVIA Internet
W WEP 58 Wireless Sound Connection 63 WPA2-PSK (AES) 58 WPA2-PSK (TKIP) 58 WPA-PSK (AES) 58 WPA-PSK (TKIP) 58 81US
The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. For customers in the U.S.: http://www.sony.com/support For customers in Canada: English: http://www.sony.ca/support French: http://fr.sony.ca/support For customers in Mexico and Latin America: http://esupport.sony.
