Operating Instructions
Table Of Contents
- WARNING
- About These Operating Instructions
- Unpacking
- Index to Parts and Control
- Getting Started
- Playback
- Sound Adjustment
- Tuner
- External Audio Device
- Using an S-AIR Product
- Setting the S-AIR ID to activate wireless transmission
- Enjoying the system’s sound in another room
- Enjoying the S-AIR receiver while the unit is in standby mode
- Identifying the unit with a specific S-AIR sub unit (Pairing operation)
- Checking the S-AIR status of the unit
- If wireless transmission is unstable
- Using an S-AIR Product
- Other Operations
- Using the Control for HDMI Function for “BRAVIA” Sync
- Preparing for the Control for HDMI function
- Turning the system off in sync with the TV
- Watching BD/DVD by a single button press
- Using the Theater Mode
- Enjoying TV sound from the speakers in this system
- Setting the Maximum Volume Level of the System
- Receiving the digital audio signal of the TV
- Operating the system via the TV remote
- Changing the language for the on-screen display of the TV
- Calibrating the Appropriate Settings Automatically
- Setting the Speakers
- Using the Sleep Timer
- Deactivating the Buttons on the Unit
- Controlling Your TV with the Supplied Remote
- Saving Power in Standby Mode
- Using the Control for HDMI Function for “BRAVIA” Sync
- Settings and Adjustments
- Additional Information
Additional Information
61
US
Sound
Video signals are only output
from the HDMI OUT jack when
connecting the HDMI OUT jack
and other video output jacks at
the same time.
• Set [Output Video Format] in [Screen Settings] to [Component Video]
(page 53).
The dark area of the picture is too
dark/the bright area is too bright
or unnatural.
• Set [Picture Quality Mode] to [Standard] (default) (page 34).
The picture is not output
correctly.
• Check the [Output Video Format] settings in [Screen Settings] (page 53).
• If the analog and digital signals are output at the same time, set [BD/DVD-
ROM 1080/24p Output] in [Screen Settings] to [Off] (page 53).
• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in
[Screen Settings] (page 53).
Picture noise appears. • The disc is dirty or flawed.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BD/DVD programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to the other input jacks.
Even though you set the aspect
ratio in [TV Type] of [Screen
Settings], the picture does not fill
the TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the
TV screen.
• If the speakers are used with a CRT-based TV or projector, install the speakers
at least 1.0 ft (0.3 meters) from the TV set.
• If the color irregularity persists, turn off the TV set once, then turn it on after 15
to 30 minutes.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
Symptom Problems and solutions
There is no sound. • The speaker cord is not connected securely.
• Check the speaker settings (page 48).
• Fast forward or fast reverse is performed. Press N to return to normal play
mode.
• Slow forward or freeze frame is performed. Press N to return to normal play
mode.
No sound is output from the
HDMI OUT jack.
• Set [Audio Output] to [HDMI] (page 54).
The left and right sounds are
unbalanced or reversed.
• Check that the speakers and components are connected correctly and securely.
There is no sound from the
subwoofer.
• Check the speaker connections and settings (pages 17, 48).
Symptom Problems and solutions