Operating Instructions
Table Of Contents
- WARNING
- About These Operating Instructions
- Unpacking
- Index to Parts and Control
- Getting Started
- Playback
- Sound Adjustment
- Tuner
- External Audio Device
- Using an S-AIR Product
- Setting the S-AIR ID to activate wireless transmission
- Enjoying the system’s sound in another room
- Enjoying the S-AIR receiver while the unit is in standby mode
- Identifying the unit with a specific S-AIR sub unit (Pairing operation)
- Checking the S-AIR status of the unit
- If wireless transmission is unstable
- Using an S-AIR Product
- Other Operations
- Using the Control for HDMI Function for “BRAVIA” Sync
- Preparing for the Control for HDMI function
- Turning the system off in sync with the TV
- Watching BD/DVD by a single button press
- Using the Theater Mode
- Enjoying TV sound from the speakers in this system
- Setting the Maximum Volume Level of the System
- Receiving the digital audio signal of the TV
- Operating the system via the TV remote
- Changing the language for the on-screen display of the TV
- Calibrating the Appropriate Settings Automatically
- Setting the Speakers
- Using the Sleep Timer
- Deactivating the Buttons on the Unit
- Controlling Your TV with the Supplied Remote
- Saving Power in Standby Mode
- Using the Control for HDMI Function for “BRAVIA” Sync
- Settings and Adjustments
- Additional Information
Additional Information
59
US
On moving the system
• Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
About S-AIR function
• As the S-AIR products transmit sound by radio
waves, sound may skip when radio waves are
obstructed. This is a characteristic of radio waves and
is not malfunction.
• As the S-AIR products transmit sound by radio
waves, equipment that generates electromagnetic
energy, such as a microwave oven, may prevent
wireless transmission.
• As the S-AIR products use the radio waves that share
the same frequency as other wireless systems, such as
wireless LAN or Bluetooth devices, interference or
poor transmission may occur. In this case, take the
following steps to enhance the transmission of
signals:
– Avoid placing the S-AIR products near other
wireless systems.
– Avoid using the S-AIR products and the other
wireless systems simultaneously.
– The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
• The transmission distance differs depending on the
usage environment. Find locations where
transmission between the S-AIR main unit and sub
unit is most effective, and install the S-AIR main unit
and sub unit there.
• Place the S-AIR products on a stable surface.
• Poor transmission may occur and the transmission
distance may be too short if the following conditions
exist:
– There is a wall/floor made of reinforced concrete
or stone between the S-AIR products.
– There is an iron divider/door or furniture/electric
product made of fireproof glass, metal, etc.,
between the S-AIR products.
Notes about the Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
This system can only play a standard circular
disc. Using neither standard nor circular discs
(e.g., card, heart, or star shape) may cause a
malfunction.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.










