Operating Instructions
Table Of Contents
- WARNING
- About These Operating Instructions
- Unpacking
- Index to Parts and Control
- Getting Started
- Playback
- Sound Adjustment
- Tuner
- External Audio Device
- Using an S-AIR Product
- Setting the S-AIR ID to activate wireless transmission
- Enjoying the system’s sound in another room
- Enjoying the S-AIR receiver while the unit is in standby mode
- Identifying the unit with a specific S-AIR sub unit (Pairing operation)
- Checking the S-AIR status of the unit
- If wireless transmission is unstable
- Using an S-AIR Product
- Other Operations
- Using the Control for HDMI Function for “BRAVIA” Sync
- Preparing for the Control for HDMI function
- Turning the system off in sync with the TV
- Watching BD/DVD by a single button press
- Using the Theater Mode
- Enjoying TV sound from the speakers in this system
- Setting the Maximum Volume Level of the System
- Receiving the digital audio signal of the TV
- Operating the system via the TV remote
- Changing the language for the on-screen display of the TV
- Calibrating the Appropriate Settings Automatically
- Setting the Speakers
- Using the Sleep Timer
- Deactivating the Buttons on the Unit
- Controlling Your TV with the Supplied Remote
- Saving Power in Standby Mode
- Using the Control for HDMI Function for “BRAVIA” Sync
- Settings and Adjustments
- Additional Information
44
US
If you use multiple wireless systems, such as
wireless LAN or Bluetooth, the transmission of
S-AIR signals or other wireless signals may be
unstable. In this case, the transmission may be
improved by changing the following [RF
Change] setting.
1 Press HOME.
The home menu appears on the TV screen.
2 Press C/c to select [Setup].
3 Press X/x to select [System Settings],
then press .
4 Press X/x to select [S-AIR Settings],
then press .
The [S-AIR Settings] display appears.
5 Press X/x to select [RF Change], then
press .
6 Press X/x to select the desired setting,
then press .
•[Auto]: Normally select this. The system
changes [RF Change] to [On] or [Off]
automatically.
• [On]: The system transmits sound by
searching for the better channel for
transmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
7 Press .
The setting is made.
8 When you set [RF Change] to [Off],
select the ID so that wireless
transmission is most stable (page 41).
Note
• In most cases, you will not need to change this
setting.
– If [RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
If wireless transmission is
unstable
For the surround amplifier
For the S-AIR receiver