Operating Instructions
Table Of Contents
- WARNING
- About These Operating Instructions
- Unpacking
- Index to Parts and Control
- Getting Started
- Playback
- Sound Adjustment
- Tuner
- External Audio Device
- Using an S-AIR Product
- Setting the S-AIR ID to activate wireless transmission
- Enjoying the system’s sound in another room
- Enjoying the S-AIR receiver while the unit is in standby mode
- Identifying the unit with a specific S-AIR sub unit (Pairing operation)
- Checking the S-AIR status of the unit
- If wireless transmission is unstable
- Using an S-AIR Product
- Other Operations
- Using the Control for HDMI Function for “BRAVIA” Sync
- Preparing for the Control for HDMI function
- Turning the system off in sync with the TV
- Watching BD/DVD by a single button press
- Using the Theater Mode
- Enjoying TV sound from the speakers in this system
- Setting the Maximum Volume Level of the System
- Receiving the digital audio signal of the TV
- Operating the system via the TV remote
- Changing the language for the on-screen display of the TV
- Calibrating the Appropriate Settings Automatically
- Setting the Speakers
- Using the Sleep Timer
- Deactivating the Buttons on the Unit
- Controlling Your TV with the Supplied Remote
- Saving Power in Standby Mode
- Using the Control for HDMI Function for “BRAVIA” Sync
- Settings and Adjustments
- Additional Information
24
US
Getting Started
Step 3: Setting up the
S-AIR Wireless System
Before performing Step 3
Make sure all connections are secure, and then
connect the AC power cords (mains leads).
To use the S-AIR wireless system, you need to
set up the surround amplifier.
The unit transmits sound to the surround
amplifier that is connected to the surround
speakers. To activate wireless transmission,
perform the following Steps.
1 Press "/1 to turn the system on.
Make sure that “S-AIR” light up in the front
panel display. When “S-AIR” does not light
up, make sure that the wireless transceiver
is inserted into the unit correctly.
2 Set the SURROUND SELECTOR switch
of the surround amplifier to
SURROUND.
3 Set the S-AIR ID switch of the surround
amplifier to A.
4 Press "/1 to turn the surround amplifier
on.
When wireless transmission is activated,
the S-AIR/STANDBY indicator turns
green.
If the S-AIR/STANDBY indicator does not
turn green, see “Surround amplifier”
(page 11).
For details of the S-AIR function, see
“Using an S-AIR Product” (page 41).
About the standby mode
The surround amplifier enters standby mode
automatically (the S-AIR/STANDBY indicator
turns red) when the main unit is in standby mode
or wireless transmission is deactivated.
The surround amplifier is turned on
automatically (the S-AIR/STANDBY indicator
turns green) when the system is turned on and
wireless transmission is activated.
"/1
SURROUND SELECTOR
SURROUND
SURROUND BACK
SURROUND SELECTOR
SURROUND
SURROUND BACK
PAI RI N G
ABC
S-AIR ID
ABC
S-AIR ID
S-AIR/STANDBY
S-AIR/STANDBY indicator
"/1