Operating instructions

59
GB
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-734-16(1)
D:\NORM'S JOB\SONY HA\SO160051\BDV-E6100_4100_3100_E2100
(PMRF 12)\4446734161_GB (CEK)\100ADD.fm
masterpage: Right
Additional Information
Playback does not start from the
resume point where you last stopped
playing.
t The resume point may be cleared from
memory depending on the disc when
• you open the disc tray.
• you disconnect the USB device.
• you play other content.
• you turn off the unit.
The language for the soundtrack/
subtitle or angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or
DVD being played.
Bonus contents or other data that are
contained in a BD-ROM cannot be
played.
t Try the following:
1 Remove the disc.
2 Turn the system off.
3 Remove and reconnect the USB
device (page 28).
4 Turn the system on.
5 Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
t Try the following:
1 Turn the system off.
2 Remove and reconnect the USB
device.
3 Turn the system on.
t Make sure that the USB device is
securely connected to the (USB)
port.
t Check if the USB device or a cable is
damaged.
t Check if the USB device is on.
t If the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the unit.
The picture/sound is poor/certain
programs display with a loss of detail,
especially during fast-motion or dark
scenes.
t Picture/sound quality may be poor
depending on Internet content
providers.
t Picture/sound quality may be
improved by changing the connection
speed. Sony recommends a connection
speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-
definition video.
t Not all videos contain sound.
The picture is small.
t Press V to zoom in.
The [Control for HDMI] function does
not work (“BRAVIA” Sync).
t Check that [Control for HDMI] is set
to [On] (page 50).
t If you change the HDMI connection,
turn the system off and on again.
t If power failure occurs, set [Control
for HDMI] to [Off], then set [Control
for HDMI] to [On] (page 50).
t Check the following and refer to the
operating instructions supplied with
the equipment.
• The connected equipment is
compatible with the [Control for
HDMI] function.
USB device
BRAVIA Internet Video
“BRAVIA” Sync
([Control for HDMI])