Digital Camera User Manual
Table Of Contents
- Basic operations
- Advanced operations
- Preparation
- Shooting
- Selecting the shooting mode
- Movie recording setup
- Adjusting the focus
- Detecting faces
- Adjusting the brightness of the image
- The flash
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Magnifies images with higher scale than the optical zoom (ZOOM)
- Selecting the drive mode
- Playback
- Setup of the camera
- Computer
- Cleaning
- Trouble shooting/Others
- Index
166
Setting the other functions of the camera
The brightness of the viewfinder is automatically adjusted to the lighting
conditions of the subject.
You can set the brightness of the viewfinder manually.
MENU button t 1 t [Viewfinder Bright.] t [Manual] t
Select the desired setting
Note
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the viewfinder is always set to the brightest setting even if you select
[Auto].
You can shorten the waiting time until the camera is turned off when it is
not being operated to prevent the battery from being consumed. If you set
this item to [Max], [Power Save] is set to [10 Sec]. If you do not operate the
camera for a given period of time, the brightness of the LCD screen is
reduced.
MENU button t 1 t [Eco Mode] t Select the desired
setting
Note
• When the AC-PW10AM AC Adaptor (sold separately) is used, this item cannot be
set to [Max].
You can set different time intervals for the camera to switch to power save
mode (Power Save). Pressing the shutter button halfway down returns the
camera to the shooting mode.
MENU button t 1 t [Power Save] t Select the desired
time
Viewfinder Bright.
Eco Mode
Power Save