Camcorder User Manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
Using the shooting function
101
• In viewfinder mode, if the shutter button is pressed halfway down and
released, “br 1” appears. “Fbr 1” appears for the flash bracket. When
flash bracket shooting starts, it indicates what number the next frame is,
for instance, “Fbr 2,” “Fbr 3.”
You can shoot using the SHUTTER and 2SEC (the shutter is released after
2 seconds) buttons on the RMT-DSLR1 Wireless Remote Commander
(sold separately). Also, refer to the operating instructions supplied with the
Wireless Remote Commander.
Note
• When you shoot images using the viewfinder, use the eyepiece cover (page 28).
Shooting with the Remote Commander
1 on the control button t
(Remote Commander)
2 Focus on the subject, point the transmitter of the Remote
Commander to the remote sensor, and shoot the image.