Help Guide

The mark shows the location of the image sensor*. When you measure the exact
distance between the product and the subject, refer to the position of the horizontal line.
*
The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the lens, the focus cannot
be confirmed. Make sure you put enough distance between the subject and the product.
[87] How to Use
Using shooting functions Adjusting the focus
AF Range Control
You can restrict the autofocus range to focus on a subject without interference from objects
in the background and foreground. The [AF Range Control] function is assigned to the C2
(Custom 2) button with the default settings.
1. Press the C2 (Custom 2) button (A).
2. Set the maximum shooting distance using the control dial and set the minimum
shooting distance using the control wheel.