Help Guide

In a scene where the ambient light consists of multiple types of light sources, it is

recommended to use the custom white balance in order to accurately reproduce the

whiteness.

1. MENU → (Camera Settings) → [White Balance] → [Custom Setup].

You can also set the white balance by pressing the WB (White Balance) button.

2. Hold the product so that the white area fully covers the AF area located in the center,

and then press on the center of the control wheel.

The calibrated values (Color Temperature and Color Filter) are displayed.

3. Select a registration number using the right/left button.

The monitor returns to the recording information display while retaining the memorized

custom white balance setting.

Note

The message [Custom WB Error] indicates that the value is higher than the expected

range, when the flash is used on a subject with too bright colors in the frame. If you

You can shoot at this point, but it is recommended that you set the white balance again to

get a more accurate white balance value.

[114] How to Use

Using shooting functions Selecting an effect mode

Picture Effect

Select the desired effect filter to achieve more impressive and artistic images.

1. MENU → (Camera Settings) → [Picture Effect] → desired setting.

Menu item details

Off (default setting):

Disables the [Picture Effect] function.

Toy Camera:

Creates a soft image with shaded corners and reduced sharpness.

Pop Color:

Creates a vivid look by emphasizing color tones.

Posterization: