User manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
76
Notes
• In the case of a subject that can be focused in autofocus mode, the z indicator lights
up when the focus is confirmed. When the Wide AF area is used, the center area is
used, and when the Local AF area is used, the area that is selected with the controller
is used.
• The camera resets the focal length to (infinity) when the POWER switch is set to
ON.
• When using a tele converter, etc., rotation of the focusing ring may not be smooth.
• The correct focus is not achieved if the diopter is not adjusted properly in viewfinder
mode (page 68).
1 Set the focus mode switch to MF.
2 Rotate the focusing ring of the
lens to achieve a sharp focus.
Focusing
ring