User manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
48
/ Shooting with the automatic
setting
The “AUTO” mode allows you to easily shoot any subject under any
conditions.
Select when shooting in a location where the use of a flash is restricted.
1 Set the mode dial to or
(Flash Off).
2 Hold the camera and look into the
viewfinder.
Focus area
3 Place the desired subject within
the focus area.
• If the (Camera shake warning)
indicator flashes, set the switch to
ON to activate the Super SteadyShot
function, or use a tripod.
(Camera shake warning) indicator
4 When using a zoom lens, turn the
zoom ring, then decide on your
shot.
or
Zoom ring