User manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
27
Preparing the camera
Using the accessories supplied
This section describes how to use the shoulder strap and the eyepiece cover.
The other accessories are described in the following pages.
• Rechargeable battery pack (page 14)
• Battery charger, Power cord (mains lead) (page 14)
• Eyecup (page 68)
• USB cable (pages 128, 144)
• Video cable (page 112)
•CD-ROM (page136)
You can prevent light from entering through the viewfinder and affecting
the exposure. When the shutter is released without the use of the
viewfinder, as in shooting with the self-timer, attach the eyepiece cover.
Attaching the shoulder strap
Attach the both ends of the strap on
the camera.
• You can also attach the eyepiece cover
(below) on the strap.
Eyepiece cover
Using the eyepiece cover