User manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
145
Printing images
To cancel the print
During printing, pressing the center of the controller cancels the print.
Remove the USB cable or turn off the camera. When you want to print
again, follow the procedure (Stages 1 to 3) above.
Page 1
Print
Prints the selected images. For details, see “Stage 3: Printing.”
Set print q’ty
You can specify the number of prints, up to 20. The same number of prints is specified
on all the selected images.
Paper size
PictBridge menu
Auto Printer setup
9×13cm/3.5"×5" 89×127 mm
Hagaki 100×147 mm
10×15cm 10×15 cm
4"×6" 101.6×152.4 mm
A6/4.1"×5.8" 105×148.5 mm
13×18cm/5"×7" 127×178 mm
Letter 216×279.4 mm
A4/8.3"×11.7" 210×297 mm
A3/11.7"×16.5" 297×420 mm