User manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
135
Viewing images on a computer
Using the software
To utilize images recorded with the camera, the following software is
provided: “Picture Motion Browser,” “Image Data Converter SR,” “Image
Data Lightbox SR” etc.
Note
• “Picture Motion Browser” is not compatible with Macintosh computers.
Recommended computer environment
x Windows
Recommended environment for using “Picture Motion Browser”
OS (pre-installed): Microsoft Windows 2000 Professional SP4/Windows
XP* SP2/Windows Vista*
* 64-bit editions and Starter (Edition) are not supported.
CPU/Memory: Pentium III 500 MHz or faster, 256 MB of RAM or more
(Recommended: Pentium III 800 MHz or faster and 512 MB of RAM or
more)
Hard Disk: Disk space required for installation—200 MB or more
Display: 1024 × 768 dots or more, High Color (16-bit color) or more
Recommended environment for using “Image Data Converter SR Ver.2”/
“Image Data Lightbox SR”
OS (pre-installed): Microsoft Windows 2000 Professional SP4/Windows
XP* SP2/Windows Vista*
* 64-bit editions and Starter (Edition) are not supported.
CPU/Memory: MMX Pentium III 1 GHz or faster is recommended, RAM
512 MB or more (RAM 1 GB or more is recommended.)
Virtual memory: 700 MB or more
Display: 1024 × 768 dots or more, High Color (16-bit color) or more
x Macintosh
Recommended environment for using “Image Data Converter SR Ver.2”/
“Image Data Lightbox SR”
OS (pre-installed): Mac OS X (v10.4)
CPU: Power Mac G4/G5 series (1.0 GHz or faster is recommended)/Intel
Core Solo/Core Duo/Core 2 Duo or faster
Memory: 512 MB or more (1 GB or more is recommended.)